Nickel Alloy 200 Washer, Alloy 201 Flat Washer, Nickel 200 Spring Washer Manufacturer

Alloy 201 Ogee Washers, 2.4066 Belleville Washers, UNS N02200 Fender Washer, Nickel 200 Split Washers, Nickel Alloy 201 Tooth Lock Washer Stockist, Nickel 200 Lock Washers, Nickel Alloy 201 Square Washer, Alloy 200 Dome Washers Supplier in Mumbai, India.

It is used in curler prosthetics & chains to make certain a higher suit of components (nearer tolerance, non-lubricated) and longer lasting.However, it indicates that during a put on system, a galling or seizure failure takes place first, observed with the aid of using dimensional loss because of put on, and eventually corrosion. Galling and put on ought to be the primary worries of the layout engineer. Although the overall corrosion resistance of these washers isn't always pretty suitable. And so, Nickel Alloy UNS N02201 Washers does provide higher chloride pitting resistance, pressure corrosion cracking resistance and crevice corrosion resistance in laboratory conditions.

The yield strength is almost two times that of stainless steels. With chloride pitting resistance is advanced to that of kind stainless,it presents remarkable excessive temperature oxidation resistance and coffee temperature impact. Applications of Nickel Alloy WNR 2.4068 Washers are valve stems, seats, and trim, fastening systems, screening, pins, bushings and curler bearings, pump shafts and rings. Other makes use of consist of put on plates, rails guides, and bridge pins. Nickel Alloy WNR 2.4066 Washers presents a giant decrease value manner to combat put on and galling as compared to primarily based totally alloys.Fastener galling - able to common meeting and disassembly, permitting extra use of the fastener earlier than the threads are torn up, additionally facilitates to dispose of corroded or frozen fasteners.It is used in an automotive valves that can resist fueloline temperatures of upto 1500°F.

Material Specification Chart of Nickel 200 / 201 Washers

Specification	ASTM B160 / ASME SB160
Size	M02 to M33, Custom Sizes
Length	3 mm to 200 mm
Washer	UNF, BSW, BSF, METRIC, UNC, or as required
Standard of Washers	DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1
Form of Washers	Hex, Threading, Square, Round as per Gauge Etc.
Raw materials Source	JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc.
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification	Dual Certified As per ASTM & ASME Codes
Threads	Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically
Test Certificate of Washers	as per EN 10204 / 3.1 Manufacturer Test Certificate
Additional Certifications	PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Production process	M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC
Head drive of Washers	Six-Lobe, Phillips, Phillips/Slot, Slotted etc
Packing of Washers	IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Surface Coating	Ptfe Coated Washers Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating
Types	Plain / Flat Washer, Spring Washers, Dome Washer, Hexagonal Washer, Square Washer, Dome Tooth Washer, Countersunk Washer, Tooth Lock Washer, Dock Washer, Fender Washer, Ogee Washer, Hex Washers, Split / Lock Washer, Customized Washer, Tab Washers

Various Types Of Nickel 200 / 201 Washers

Nickel Alloy 200 / 201 Flat Washers

ASTM B160 Nickel 201 Thick Flat Washer
ASME SB160 Nickel Alloy 200 Knurled Flat Washer
UNS N02200 Plain Washer
Nickel 200 Thin Flat Washer
Alloy 201 Flat Washer
2.4066 Flat Washer

Nickel Alloy 200 / 201 Ogee Washers

2.4066 Ogee Washer
Alloy 201 Ogee Washer
UNS N02200 Ogee Washer
Nickel 200 Thick Ogee Washer
ASTM B160 Nickel 200 Ogee Washer
ASME SB160 Nickel Alloy 201 Thin Ogee Washer

Nickel Alloy 200 / 201 Lock Washers

2.4066 Internal Tooth Lock Washer
ASME SB160 Nickel Alloy 200 Split Lock Washer
UNS N02200 Lock Washer
Alloy 201 Lock Washer
Nickel Alloy 200 Lock Washer
ASTM B160 Nickel 201 Heavy Duty Lock Washers

Nickel Alloy 200 / 201 Spring Washers

Nickel 200 Spring Washers
Alloy 200 Wave Spring Washer
ASTM B160 Nickel 201 Spring Washer
2.4068 Helical Spring Washer
ASME SB160 Nickel Alloy 201 Flat Spring Washer
UNS N02201 Spring Washers

Nickel Alloy 200 / 201 Star Washers

Nickel 201 External Star Washer
2.4068 Spring Washer
ASTM B160 Nickel 201 Spring Washer
Alloy 200 Star Spring Washer
UNS N02201 Internal Star Washer
ASME SB160 Nickel Alloy 200 Spring Washer

Nickel Alloy 200 / 201 Fender Washers

Alloy 201 Fender Washer
Nickel 201 Spring Steel Fender Washer
UNS N02201 Heavy Duty Fender Washer
ASME SB160 Nickel Alloy 200 Fender Washer
2.4068 Fender Washer
ASTM B160 Nickel 200 Standard Fender Washer

Equivalent Grades of Nickel Alloy 200 / 201 Washers

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Nickel 200	2.4066	N02200	NW 2200	NA 11	НП-2	N-100M	Ni 99.2
Nickel 201	2.4068	N02201	NW 2201	NA 12	НП-2	–	LC-Ni 99

View Size Table Of Nickel 200 Washers, We have Global sales network for Nickel Alloy 201 Plain Washer, Wide Stockist Of Werkstoff No 2.4068 Spring Washers In India.

Size Chart of Nickel Alloy 200 / 201 Washers

Size	USS			SAE
Size	Inside Diameter (A)	Outside Diameter (B)	Thickness (C)	Inside Diameter (A)	Outside Diameter (B)	Thickness (C)
#2	–	–	–	3/32″	1/4″	0.020″
#4	–	–	–	1/8″	5/16″	0.032″
#6	–	–	–	5/32″	3/8″	0.049″
#8	–	–	–	3/16″	7/16″	0.049″
#10	–	–	–	7/32″	1/2″	0.049″
#12	–	–	–	1/4″	9/16″	0.065″
1/4″	5/16″	0.734″	0.065″	9/32″	5/8″	0.065″
5/16″	3/8″	7/8″	0.083″	11/32″	11/16″	0.065″
3/8″	7/16″	1″	0.083″	13/32″	13/16″	0.065″
7/16″	1/2″	1-1/4″	0.083″	15/32″	15/16″	0.065″
1/2″	9/16″	1-3/8″	0.109″	17/32″	1-1/16″	0.095″
9/16″	5/8″	1-15/32″	0.109″	19/32″	1-5/32″	0.095″
5/8″	11/16″	1-3/4″	0.134″	21/32″	1-5/16″	0.095″
3/4″	13/16″	2″	0.148″	13/16″	1-15/32″	0.134″
7/8″	15/16″	2-1/4″	0.165″	15/16″	1-3/4″	0.134″
1″	1-1/16″	2-1/2″	0.165″	1-1/16″	2″	0.134″
1-1/8″	1-1/4″	2-3/4″	0.165″	–	–	–
1-1/4″	1-3/8″	3″	0.165″	–	–	–
1-3/8″	1-1/2″	3-1/4″	0.180″	–	–	–
1-1/2″	1-5/8″	3-1/2″	0.180″	–	–	–
1-5/8″	1-3/4″	3-3/4″	0.180″	–	–	–
1-3/4″	1-7/8″	4″	0.180″	–	–	–
2″	2-1/8″	4-1/2″	0.213″	–	–	–

Check available Sizes of ASME SB 160 Nickel 200 Washers, Ask For Ready Stock of UNS N02201 Washers in Mumbai, India.

BAGODA

Quick Contact

Call Us

+91 22 - 66151721

Need Help? Send us Email

sales@bagodasteelproject.com

Dimensions of Nickel Alloy 200 / 201 Spring Washer

NOM SIZE	Inner Dia (d) Basic Tol (+)		Outer Dia (d1) Max	WIDTH (b) Basic Tol (+ or -)		THICKNESS (S) Basic Tol (+ or -)		Weight per 1000 in Kgs
3	3.1	0.3	6.2	1.3	0.1	0.8	0.1	0.11
4	4.1	0.3	7.6	1.5	0.1	0.9	0.1	0.18
5	5.1	0.3	9.2	1.8	0.1	1.2	0.1	0.36
6	6.1	0.4	11.8	2.5	0.15	1.6	0.1	0.83
8	8.1	0.4	14.8	3	0.15	2	0.1	1.60
10	10.2	0.5	18.1	3.5	0.2	2.2	0.15	2.53
12	12.2	0.5	21.1	4	0.2	2.5	0.15	3.82
14	14.2	0.5	24.1	4.5	0.2	3	0.15	6.01
16	16.2	0.8	27.4	5	0.2	3.5	0.2	8.91
18	18.2	0.8	29.4	5	0.2	3.5	0.2	9.73
20	20.2	1	33.6	6	0.2	4	0.2	15.20
22	22.5	1	35.9	6	0.2	4	0.2	16.50
24	24.5	1	40	7	0.25	5	0.2	26.20
27	27.5	1	43	7	0.25	5	0.2	28.70
30	30.5	1.2	48.2	8	0.25	6	0.2	44.30
33	33.5	1.2	55.2	10	0.25	6	0.2	63.00
36	36.5	1.2	58.2	10	0.25	6	0.2	67.30
39	39.5	1.2	61.2	10	0.25	6	0.2	71.70
42	42.5	1.2	68.2	12	0.25	7	0.25	111.00
45	45.5	1.2	71.2	12	0.25	7	0.25	117.00
48	49	1.5	75	12	0.25	7	0.25	123.00
52	53	1.5	83	14	0.25	8	0.25	320.00

Dimensions of Nickel Alloy 200 / 201 Flat Washer

Bolt Size	USS			SAE
Bolt Size	OD (in.)	ID (in.)	Thickness	OD (in.)	ID (in.)	Thickness
1/8 (#6)	–	–	–	0.375	0.156	.036/.065
5/32 (#8)	–	–	–	0.438	0.188	.036/.065
3/16 (#10)	0.560	0.250	.036/.065	0.500	0.220	.036/.065
7/32 (#12)	–	–	–	0.562	0.250	.051/.080
1/4 (#14)	0.734	0.312	.051/.080	0.625	0.281	.051/.080
5/16	0.875	0.375	.064/.104	0.688	0.344	.051/.080
3/8	1.000	0.438	.064/.104	0.812	0.406	.051/.080
7/16	1.250	0.500	.064/.104	0.922	0.469	.051/.080
1/2	1.375	0.562	.086/.132	1.062	0.531	.074/.121
9/16	1.469	0.625	.086/.132	1.156	0.594	.074/.121
5/8	1.750	0.688	.108/.160	1.312	0.656	.074/.121
3/4	2.000	0.812	.122/.177	1.469	0.812	.108/.160
7/8	2.250	0.938	.136/.192	1.750	0.938	.108/.160
1	2.500	1.062	.136/.192	2.000	1.062	.108/.160
1 1/8	2.750	1.250	.136/.192	2.250	1.250	.108/.160
1 1/4	3.000	1.375	.136/.192	2.500	1.375	.136/.192
1 3/8	3.250	1.500	.153/.213	2.750	1.500	.136/.213
1 1/2	3.500	1.625	.153/.213	3.000	1.625	.153/.213
1 5/8	3.750	1.750	.153/.213	–	–	–
1 3/4	4.000	1.875	.153/.213	–	–	–
1 7/8	4.250	2.000	.153/.213	–	–	–
2	4.500	2.125	.153/.213	–	–	–
2 1/4	4.750	2.375	.320/.248	–	–	–
2 1/2	5.000	2.625	.210/.280	–	–	–
2 3/4	5.250	2.875	.228/.410S	–	–	–
3	5.500	3.125	.249/.327	–	–	–

Weight Chart Of Nickel Alloy 200 / 201 Washers

APPROX. WEIGHT IN KGS FOR 100 NOS
SIZE	PLAIN PUNCHED WASHER IS:2016	HEAVY WASHER IS:6610	MACHINED WASHER IS:2016	SQUARE \| TAPER \| WASHERS				SPRING WASHER FLAT SECTION IS:3063-72	SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980	Size (Inches)	PLAIN PUNCHED WASHER BS:3410 TABLE 7
				MACHINED		HIGH STRENGTH FRICTION GRIP
				FOR CHANNELS IS:5372-75	FOR I-BEAM IS:5374-75	TYPE-B (CHANNELS) IS : 6649-85	TYPE-C ( I-BEAMS ) IS : 6649-85
M-3								0.01	0.01
M-4								0.02	0.02
M-5	0.04		0.04					0.03	0.03
M-6	0.11		0.11					0.08	0.04	1/4″	0.21
M-8	0.20		0.21	1.10	1.20			0.16	0.11	5/16″	0.35
M-10	0.39	1.60	0.40	1.00	1.10			0.25	0.20	3/8″	0.48
M-12	0.58	1.90	0.62	2.00	2.20	2.00	1.80	0.38	0.23	1/2″	1.07
M-14	0.82							0.60	0.38
M-16	1.06	2.90	1.13	3.40	3.75	9.00	8.50	0.89	0.59	5/8″	1.85
M-18	1.27							0.97	0.66
M-20	1.64	4.40	1.72	5.80	6.70	8.50	8.00	1.52	1.23	3/4″	2.91
M-22	1.75					7.50	7.00	1.65	1.36	7/8″	4.27
M-24	3.11	6.30	3.30	13.50	16.00	6.50	6.00	2.62	1.81	1″	6.13
M-27	3.94	8.00	4.23	12.50	15.00	12.00	11.50	2.87	2.06	1.1/8″	7.69
M-30	5.05	10.10	5.36	16.50	18.70	17.50	16.00	4.43	3.20	1.1/4″	9.90
M-33	7.10	12.00	7.54	21.00	23.50	23.00	22.50	6.30	3.50
M-36	8.73	14.60	9.20	25.50	29.20	26.50	26.00	6.73	5.25	1.1/2″	17.24
M-39	12.60	16.70	13.30	28.30	34.50			7.17	5.61
M-42	17.50	20.10	18.30					11.10	8.00
M-45	21.20	22.20	22.00					11.70	8.53
M-48	28.40	26.00	29.40					12.30	9.00	2″	27.78
M-52	31.90		33.00					18.20
M-56	47.90							19.30
M-60	51.60							20.30
M-64	55.40							21.80
M-68	57.40
M-72	63.40							24.00

Ready Stock Nickel Alloy 200 / 201 Washers

Nickel Alloy 200 Fender Washer
Nickel 201 Dock Washer Stockholder
ASME SB160 Nickel 201 Fender Washer
Nickel 200 Punched Washer
Nickel Alloy 201 Spring Washers Distributor
2.4066 Machine Washer
Nickel 201 Countersunk Washer
UNS N02200 Washers
Alloy 200 Hex Washers
Nickel 200 Hexagonal Washer
Alloy 200 Hex Washers
200 Nickel Belleville Washers
Nickel Alloy 200 Finishing Washers
Alloy 200 Ogee Washer
201 Nickel Spherical Washer
JIS NCF 200 Tooth Lock Washer
Nickel 200 Tab Washers
Nickel Alloy 201 Tab Washer Manufacturer
Nickel Alloy 200 Hex Washers
Nickel Alloy 200 Industrial Washers
ASTM B160 Nickel 201 Wave Washer
Nickel Alloy 201 Square Washer
Nickel Alloy 200 Countersunk Finishing Washer
ASTM B160 Nickel 201 Dome Washer
Nickel 200 Dock Washer
DIN 2.4066 Countersunk Washer
Alloy 200 Hexagonal Washer
ASTM B160 Nickel 201 Flat Washers
201 Nickel Split Ring Washer
200 Nickel Conical Spring Washer
Nickel 200 Customized Washer
ASTM B160 Nickel 200 Washers
Nickel Alloy 200 Round Washer
Nickel Alloy 200 Split Washer
Nickel Alloy 201 Customized Washer
Alloy 201 Fender Washers
200 Nickel Square Washer Manufacturer
Nickel 201 Industrial Washers
Nickel Alloy 200 Washer
Nickel 201 Tab Washer Exporter
Alloy 200 Cup Washer
Nickel 200 Split / Lock Washer
Nickel Alloy 200 Flat Washer Stockist
Nickel 201 Spring Washers
Nickel 201 Spring Washers
Nickel 200 Dome Tooth Washer
Nickel Alloy 200 Curved Spring Washer
Nickel Alloy 201 Flat Washer
Alloy 201 Plain Washer Supplier in Mumbai
Nickel 200 Star Washers

Nickel Alloy 200 / 201 Washers Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Alloy 200 / 201 Washers Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200 / 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Export Destinations For Nickel Alloy 200 / 201 Washers

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Nickel 200 / 201 Washers

Nickel Alloy 200 Washers, ASTM B160 Nickel 201 Spring Washers, Nickel 201 Industrial Washers, Nickel 200 Flat Washers, Alloy 200 Star Washers Price in India.