• Shop No 6 , 23/A C.P Tank Road, Mumbai 400004.
  • Talk With Our Experts +91 9011334411

Stainless Steel 316 / 316L Fasteners

Stainless Steel 316L Stud Bolts In Philippines, 316 SS Fasteners, SS 316 Nuts, Stainless Steel 316 Bolts, ASTM A193 SS 316L Washers Price in India.

Bagoda Steel is a standard supplier and exporter of Stainless Steel 316 / 316L Fasteners, which is factory-made at our excessive-tech infrastructure capacity using contemporary machines and contemporary technology. Further, our experts test the high-satisfactory of the procured fasteners on numerous parameters to make sure their most suitable high-satisfactory. Stainless Steel UNS S31600 Fasteners has a few splendid capabilities to provide consisting of Tough construction, Lightweight, Dimensionally precise, etc. We have emerge as in offering our valued clienteles an in depth variety of these fasteners, which can be additionally being presented in exclusive configurations and dimensions to our customers. We are a known distributor and dealer of our fasteners, that's designed to mix stepped forward resistance to strain corrosion cracking (such as sulfide strain corrosion cracking), pitting, crevice corrosion and excessive strength whilst in comparison with different stainless alloys. Stainless Steel UNS S31603 Fasteners is a blended microstructure of austenitic and ferrite which has stepped forward strength over ferrite and austenitic metallic grades with comparable corrosion resistance qualities.

Industrial Product
Stainless Steel 316 / 316L fasteners

1.4401 Nuts, Stainless Steel 316 Hex Bolts In Indonesia, 316L Stainless Steel Threaded Rod, SUS 316L Anchor Bolts, SS 316 Fasteners In Philippines, SS 316L Screws, SS 316 Carriage Bolts Stockist, UNS S31600 Allen Cap Screw, SS 316 Flat Washers Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

The warehouse of our business enterprise is well - knitted with numerous cargo and transportation networks because of which these Stainless Steel WNR 1.4401 Fasteners are well timed added on the clients' doorstep. Normal increasing techniques may be utilized in fasteners; however the enlargement calls for better preliminary pressure and ought to be undertaken in a single operation. As a popular rule, tube to joints ought to be welded if the carrier situations consist of an excessive chloride concentration, therefore proscribing the hazard of crevice corrosion.

Stainless Steel WNR 1.4404 Fasteners well-known shows a low coefficient of thermal enlargement and better warmth conductivity than austenitic steels and is appropriate for working temperatures as much as three hundred Degree C. Providing better strength than each austenitic and 22% Cr, it is applicable to a range of applications in industries consisting of Chemical Processing, Oil & Gas, and Marine environments. For the systematic garage of the huge collection of these fasteners in a prepared manner, we've set up a cutting-edge warehousing facility at our base.

Material Specification Chart of SS 316 / 316L Fasteners

Standard ASTM A193 / A194, ASME SA193 / SA194
Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head Drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

SS 316 / 316L Fasteners Manufacturing Standards

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Various Types Of 316 / 316L Stainless Steel Fasteners

SS 304 / 304H / 304L Bolts
SS 316 / 316L Bolts
  • ASTM A193 SS 316 Bolts
  • 316L SS Hex Bolts In Malaysia
  • Stainless Steel 316 Bolts In Indonesia
  • ASME SA193 SS 316L Bolts
  • 1.4436 Heavy Hex Bolts
  • UNS S31600 Bolts
SS 316 / 316L Nuts
SS 316 / 316L Nuts
  • UNS S31603 Nuts
  • ASME SA194 SS 316L Nuts
  • 316L SS Hex Nuts In Philippines
  • Stainless Steel 316 Nuts In Mexico
  • 1.4404 Heavy Hex Nuts
  • ASTM A194 SS 316 Nuts
SS 316 / 316L Screw
SS 316 / 316L Screw
  • ASTM A193 SS 316 Screw
  • Stainless Steel 316 Screw In Japan
  • 1.4436 Hex Cap Screws
  • UNS S31600 Socket Set Screws
  • ASME SA193 SS 316L Screw
  • 316L SS Allen Cap Screw In Italy
SS 316 / 316L Washers
SS 316 / 316L Washers
  • ASME SA193 SS 316L Washers
  • 316L SS Flat Washer In Kuwait
  • 1.4435 Beveled Washers
  • UNS S31603 Lock Washers
  • ASTM A193 SS 316 Washers
  • Stainless Steel 316 Washers In Spain
SS 316 / 316L Threaded Rods
SS 316 / 316L Threaded Rods
  • 316L SS Threaded Rods In Japan
  • Stainless Steel 316 Threaded Rods In Singapore
  • ASTM A193 SS 316 Threaded Rods
  • UNS S31600 Threaded Rods
  • 1.4401 Threaded Rods
  • ASME SA193 SS 316L Threaded Rods
SS 316 / 316L Stud Bolts
SS 316 / 316L Stud Bolts
  • UNS S31600 Stud Bolts
  • Stainless Steel 316 Stud Bolts In Italy
  • ASME SA193 SS 316L Stud
  • ASTM A193 SS 316 Stud Bolts
  • 316L SS Stud Bolts In Indonesia
  • 1.4404 Stud Bolts
SS 316 / 316L Anchor Bolts
SS 316 / 316L Anchor Bolts
  • 316L SS Wedge Anchor Bolt In Japan
  • UNS S31603 Concrete Anchors
  • 1.4435 J Anchor Bolts
  • ASTM A193 SS 316 Anchor Bolts
  • Stainless Steel 316 Anchor Bolts In Singapore
  • ASME SA193 SS 316L Self Tapping Anchor

Equivalent Grades of Stainless Steel 316 /316L Fasteners

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 – Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
Fasteners Dimensions

View Size Table Of 316 SS Fasteners, We have Global sales network for Stainless Steel 316L Stud Bolts, Wide Stockist Of Werkstoff No 1.4404 Nuts, Bolts, Washers In India.

Size Chart of SS 316 / 316L Bolts

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Check available Sizes of ASME SA 193 SS 316 / 316L Stud Bolt, Ask For Ready Stock of UNS S31603 Fasteners in Mumbai, India.

BAGODA

Quick Contact

SS 316 / 316L Washer Weight & Dimensions

Bolt Size A B C Weight (lbs.) Per 100 Pieces
ID OD Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

SS 316 / 316L Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4 –
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2 –
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Ready Stock Stainless Steel 316 / 316L Fasteners

  • Stainless Steel 316L Hex Washers In Indonesia
  • Stainless Steel 316L Allen Cap Screw
  • 316 SS Hex Coupling Nut
  • ASTM A193 Stainless Steel 316 Fasteners
  • SS 316 Flange Bolt In Malaysia
  • Stainless Steel 316 T-Head Bolts
  • AISI 316 Double Ended Stud
  • SS 316 Dock Washer Stockholder
  • 316L SS Threaded Rod In Mexico
  • 316L SS Plain Washer Supplier in Mumbai
  • Stainless Steel 316L Elevator Bolt In Philippines
  • 316 SS Tie Rods
  • 316 Stainless Steel Eye Bolts
  • ASME SA193 316L Stainless Steel Fender Washer
  • SS 316L Heavy Hex Nuts In Japan
  • Stainless Steel 316L Hex Head Bolt
  • Stainless Steel 316L Socket Cap Screw In Italy
  • 316 Stainless Steel Hexagonal Washer
  • Stainless Steel 316 Machine Fasteners Exporter
  • 316 Stainless Steel Hex Set Screw Manufacturer
  • Stainless Steel 316 Concrete Screw In Spain
  • SS 316 Fasteners In Kuwait
  • Stainless Steel 316L Square Nuts In Singapore
  • 316 SS Foundation Bolts Manufacturer
  • ASTM A194 SS 316 Wing Nuts
  • 316L Stainless Steel Acorn Nuts
  • 316L Stainless Steel Structural Bolts
  • 316 Stainless Steel Washers In Indonesia
  • 316 Stainless Steel Machine Bolt
  • Stainless Steel 316L Coupling Nut In Malaysia
  • 316 Stainless Steel Ogee Washer
  • SS 316L Bolts
  • ASTM A193 SS 316 Flat Washers
  • SS 316 Tooth Lock Washer
  • Stainless Steel 316L Stud Bolts In Mexico
  • Stainless Steel 316L Wing Nuts In Japan
  • 1.4436 Fasteners
  • Stainless Steel 316L Self Locking Nuts
  • ASTM A193 SS 316L Nyloc Nuts
  • SS 316L Screws Distributor
  • Stainless Steel SUS 316L Split / Lock Washer
  • UNS S31603 Fasteners
  • SS 316 Heavy Hex Bolts In Italy
  • Stainless Steel 316L Bolts In Singapore
  • SS 316 Hex Head Bolts
  • 316L Stainless Steel Lock Nut
  • DIN 1.4435 Countersunk Washer
  • 316L SS Carriage Bolt Stockist
  • Stainless Steel 316 Anchor Bolts In Kuwait
  • SS 316 Stud Bolts
  • 316 Stainless Steel Customized Washer In Spain
  • Stainless Steel 316L Hex Domed Cap Nuts

Stainless Steel 316 / 316L Fasteners Chemical Composition

GradeCMnSiPSCrMoNiN
SS 3160.08 max2 max0.75 max0.045 max0.030 max18 – 20–8 – 11–
SS 316L0.035 max2.0 max1.0 max0.045 max0.03 max18 – 20–8 – 13–

316 / 316L Stainless Steel Fasteners Mechanical Properties

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31400 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Export Destinations For 316 / 316L SS Fasteners

industry