• Shop No 6 , 23/A C.P Tank Road, Mumbai 400004.
  • Talk With Our Experts +91 9011334411

Titanium Gr.5 Flanges

Titanium Gr.5 Pipe Flanges In Italy, Titanium Gr.5 Weld Neck Flanges, Titanium Alloy Gr.5 Lap Joint Flanges In Kuwait, ASTM B381 Titanium Gr.5 Slip on Flanges, ANSI B16.5 Titanium Gr.5 Blind Flanges Price in India.

Bagoda Steel is a standard manufacturer and distributor of Titanium Grade 5 Flanges, which has been utilized in a few gas applications wherein hydrogen sulfide can reason sulfide strain corrosion. The better chromium, molybdenum and nitrogen contents bring about a Pitting Resistance Equivalent number, offering pitting and crevice corrosion resistance advanced to austenitic and our flanges in nearly all corrosive media, and a Critical Pitting Temperature exceeding 50 Degree C. Supplied in company of the annealed condition, Titanium UNS R56400 Slip On Flanges achieves yield strengths, more than maximum austenitic and stainless grades. It cannot be hardened via way of means of warmness remedy, where on the other hand may be strengthened via way of means of cold working.

Industrial Product
Titanium Gr.5 Flanges

Titanium Gr.5 Socket weld Flanges In Philippines, Titanium Gr.5 Plate Flanges, UNS N56400 Flanges, Ti Alloy Gr.5 Long Weld Neck Flanges Stockist, 3.7165 SORF Flanges, Titanium Alloy Gr.5 Industrial Flanges In Malaysia, ASME SB381 Titanium Gr.5 Forged Flanges, JIS NCF Gr.5 Threaded Flanges, Titanium Alloy Gr.5 RTJ Flanges Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

It is solid among 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of half-hour according to inch of billet or ingot segment thickness. Forging of these flanges must be commenced at once whilst the inventory is eliminated from the reheat furnace, wherein discounts assist to preserve as an awful lot inner warmness as possible. For most fulfilling corrosion resistance, solid components of our Grade 5 Ti-6Al-4V Socket Weld Flanges must be in the end annealed. It is usually provided within the solution-annealed condition, wherein this remedy is finished at 2050 Degree F (1120 Degree C) observed via way of means of water quench or fast air cool.

The remedy in our flanges is achieved after hot working to make certain most fulfilling corrosion resistance and among cold- working operations. It is taken into consideration mild until hard to machine, however may be machined the usage of traditional methods. These flanges are supplied to the customers after nicely fine tests of cutting, completing and ensuring their abidance in company of enterprise laid norms. Titanium WNR 3.7165 Forged Flanges has an excessive tensile strength generally has an excessive fatigue restrict and excessive resistance to each fatigue and corrosion fatigue. It gives quicker machining speeds, longer device life, stepped forward element fine, and decrease overall price of machined components.

Material Specification Chart of Titanium Gr.5 Flanges

Size Chart 1/2" (15 NB) to 48" (1Gr.2NB) DN10~DN5000
Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types Forged / Threaded / Screwed / Plate
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to Gr.2 NB (8")
Equal and Reducing Configurations
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
-BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM B381 Gr.5 Titanium Flanges
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Titanium Gr.5 Flanges Manufacturing Standards

American Standard Standard Code ANSI ASME SB381 ANSI ASME B16.5 ASME – B 16.47 ASME – B 16.36    
Standard Name Forged Flanges Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange Welding neck flange, Blind flange Welding neck flange Slip on flange    
German Standard DIN 2527 DIN 2573 / 2576 DIN 2673 DIN 2641 / 2642 DIN 28115 DIN PN10, PN16 DIN PN20, PN25
Blind Flanges, BLRF Flat Flange for Welding (Slip On) Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) Lapped / Loose (Lap Joint) Flanges Plain Collars Long Neck Welding Flanges PN10 Flanges, DIN PN 10 Flanges, PN16 Flange PN20 Flanges, DIN PN 25 Flanges
Japanese Standard JIS B2220 JIS B2291 JIS 5K, 10K JIS 16K, 20K JIS 30K, 40K    
Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) 5K SORF Flanges, 10K SOFF Flanges 16K Blind Flanges, 20K BLRF Flanges 30K Slip on Flanges, 40K Blind Flanges    
Italian Standard UNI FLANGES            
Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)            
British Standard BS 10 Table D BS 10 Table E BS 10 Table F BS 10 Table H      
BS 10 Table D Flanges, Table D Pipe Flange BS 10 Table E Flanges, Table E Pipe Flange BS 10 Table E Flanges, Table E Flanges BS 10 Table E Flanges, Table E Pipe Flanges      

Manufacturing Standards / Pressure Rating

ASME/ANSI B 16.5 Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS PN 2.5 TO PN Gr.2
BS 1560 BOSS Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Various Types Of Titanium Gr.5 Flanges

Titanium Gr.5 Socket Weld Flanges
Titanium Gr.5 Socket Weld Flanges
  • ASME SB381 Titanium Gr.5 SWRF Flanges
  • 3.7165 Socket weld Flange
  • ASTM B381 Titanium Gr.5 Socket weld Flanges
  • Titanium Gr.5 SWRF Flanges In Indonesia
  • Titanium Alloy Gr.5 Socket weld Flanges In Mexico
  • UNS N56400 Socket weld Flanges
Titanium Gr.5 Lap joint Flanges
Titanium Gr.5 Lap Joint Flanges
  • ASME SB381 Titanium Gr.5 Lapped Joint Flanges
  • Titanium Alloy Gr.5 Lapped Joint Flanges In Philippines
  • ASTM B381 Titanium Gr.5 Lap Joint Flanges
  • UNS N56400 Lap Joint Flanges
  • Titanium Gr.5 LJ Flanges In Japan
  • 3.7165 Lap Joint Flange
Titanium Gr.5 Slip on Flanges
Titanium Gr.5 Slip on Flanges
  • 3.7165 Slip on Flange
  • Titanium Alloy Gr.5 Slip on Flanges In Spain
  • ASTM B381 Titanium Gr.5 Slip on Flanges
  • ASME SB381 Titanium Gr.5 SORF Flanges
  • Titanium Gr.5 SORF Flanges In Kuwait
  • UNS N56400 Slip on Flanges
Titanium Gr.5 Forged Flanges
Titanium Gr.5 Forged Flanges
  • UNS N56400 Forged Flanges
  • Titanium Alloy Gr.5 Forged Flanges In Singapore
  • Titanium Gr.5 Forged Flanges In Kuwait
  • 3.7165 Forged Flange
  • ASTM B381 Titanium Gr.5 Forged Flanges
  • ASME SB381 Titanium Gr.5 Forged Flanges
Titanium Gr.5 Orifice Flanges
Titanium Gr.5 Orifice Flanges
  • UNS N56400 Orifice Flanges
  • Titanium Alloy Gr.5 Orifice Flanges In Mexico
  • ASTM B381 Titanium Gr.5 Orifice Flanges
  • 3.7165 Orifice Flange
  • ASME SB381 Titanium Gr.5 Orifice Flanges
  • Titanium Gr.5 Orifice Flanges In Philippines
Titanium Gr.5 Blind Flanges
Titanium Gr.5 Blind Flanges
  • ASME SB381 Titanium Gr.5 BLRF Flanges
  • Titanium Alloy Gr.5 Blind Flanges In Spain
  • ASTM B381 Titanium Gr.5 Blind Flanges
  • Titanium Gr.5 BLRF Flanges In Japan
  • UNS N56400 Blind Flanges
  • 3.7165 Blind Flange
Titanium Gr.5 Weld Neck Flanges
Titanium Gr.5 Weld Neck Flanges
  • 3.7165 Welding Neck Flange
  • Titanium Alloy Gr.5 Welding Neck Flanges In Italy
  • Titanium Gr.5 WNRF Flanges In Malaysia
  • ASME SB381 Titanium Gr.5 WNRF Flanges
  • ASTM B381 Titanium Gr.5 Weld Neck Flanges
  • UNS N56400 Weld Neck Flanges
Titanium Gr.5 Reducing Flanges
Titanium Gr.5 Reducing Flanges
  • Titanium Alloy Gr.5 Reducing Flanges In Mexico
  • UNS N56400 Reducing Flanges
  • ASME SB381 Titanium Gr.5 Reducing Flanges
  • Titanium Gr.5 Reducing Flanges In Italy
  • 3.7165 Reducing Flange
  • ASTM B381 Titanium Gr.5 Reducing Flanges
Titanium Gr.5 Threaded Flanges
Titanium Gr.5 Threaded Flanges
  • Titanium Alloy Gr.5 Threaded Flanges In Indonesia
  • 3.7165 Threaded Flange
  • UNS N56400 Threaded Flanges
  • ASME SB381 Titanium Gr.5 Screwed Flanges
  • Titanium Alloy Gr.5 Screwed Flanges In Kuwait
  • ASTM B381 Titanium Gr.5 Threaded Flanges
Titanium Gr.5 Long Weld Neck Flanges
Titanium Gr.5 Long Neck Weld Flanges
  • 3.7165 Long Weld Neck Flange
  • Titanium Gr.5 LWN Flanges In Malaysia
  • ASTM B381 Titanium Gr.5 Long Weld Neck Flanges
  • Titanium Alloy Gr.5 Long Weld Neck Flanges In Japan
  • ASME SB381 Titanium Gr.5 LWN Flanges
  • UNS N56400 Long Weld Neck Flanges
Titanium Gr.5 Spectacle Blind Flanges
Titanium Gr.5 Spectacle Blind Flanges
  • Titanium Alloy Gr.5 Spectacle Blind Flanges In Spain
  • ASME SB381 Titanium Gr.5 Spectacle Blind Flanges
  • UNS N56400 Spectacle Blind Flanges
  • 3.7165 Spectacle Blind Flange
  • Titanium Gr.5 Spectacle Blind Flanges In Kuwait
  • ASTM B381 Titanium Gr.5 Spectacle Blind Flanges
Titanium Gr.5 Ring Type Joint Flanges
Titanium Gr.5 Ring Type Joint Flanges
  • 3.7165 Ring Type Joint Flange
  • Titanium Gr.5 RTJ Flanges In Italy
  • Titanium Alloy Gr.5 Ring Type Joint Flanges In Mexico
  • ASTM B381 Titanium Gr.5 RTJ Flanges
  • ASME SB381 Titanium Gr.5 RTJ Flanges
  • UNS N56400 Ring Type Joint Flanges

Equivalent Grades of Titanium Gr.5 Flanges

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400
Flanges Dimensions

View Size Table Of Titanium Gr.5 Pipe Flanges, We have Global sales network for Titanium Gr.5 SORF Flanges, Wide Stockist Of Werkstoff No 3.7165 BLRF Flanges, Raised Face, Flat Face Flanges In India.

ASTM B381 Titanium Alloy Gr.5 Pipe Flanges

Forged and Plate Flanges
Products Size
ASTM B381 Titanium Alloy Gr.5 Slip-On Flanges ASTM B381 Titanium Alloy Gr.5 Weld Neck Flanges Sizes 1/8″ – 36″
Raised Face or Flat Face
ASTM B381 Titanium Alloy Gr.5 Blind Flanges ASTM B381 Titanium Alloy Gr.5 Lap Joint Flanges
ASTM B381 Titanium Alloy Gr.5 Orifice Flanges ASTM B381 Titanium Alloy Gr.5 RTJ Flanges
ASTM B381 Titanium Alloy Gr.5 Square Flanges ASTM B381 Titanium Alloy Gr.5 Forged Flanges
ASTM B381 Titanium Alloy Gr.5 Plate Flanges ASTM B381 Titanium Alloy Gr.5 Reducing Flanges
ASTM B381 Titanium Alloy Gr.5 Socket Weld Flanges ASTM B381 Titanium Alloy Gr.5 Threaded Flanges
ASTM B381 Titanium Alloy Gr.5 BS 4504 Flanges ASTM B381 Titanium Alloy Gr.5 SAE Flanges
ASTM B381 Titanium Alloy Gr.5 Backing Flanges ASTM B381 Titanium Alloy Gr.5 BS 10 Flanges
ASTM B381 Titanium Alloy Gr.5 JIS B2220 Flange ASTM B381 Titanium Alloy Gr.5 AWWA C207 Flanges

Check available Sizes of ASME SB 564 Titanium Alloy Gr.5 Pipe Flanges, Ask For Ready Stock of UNS N56400 Male & Female Flanges in Mumbai, India.

BAGODA

Quick Contact

Schedule / Class of Titanium Gr.5 Flanges

Flange Schedule/Class Flange Connection Type Pipe Size – Pipe Flanges Max. Pressure
ASME B16.5 Class 150 FNPT 1/2″ 150 psi
ASME B16.5 Class 150 Socket Weld 1/2″ 275 psi
ASME B16.5 Class 150 Welded 1/2″ 150 psi
ASME B16.5 Class 150 FNPT 3/4″ 150 psi
ASME B16.5 Class 150 Socket Weld 3/4″ 275 psi
ASME B16.5 Class 150 Socket Weld 1-1/4″ 275 psi
ASME B16.5 Class 150 Socket Weld 1-1/2″ 275 psi
ASME B16.5 Class 150 FNPT 2″ 150 psi
ASME B16.5 Class 150 Socket Weld 2″ 275 psi
ASME B16.5 Class 150 Socket Weld 2-1/2″ 275 psi
ASME B16.5 Class 150 Socket Weld 3″ 275 psi
ASME B16.5 Class 150 FNPT 4″ 150 psi
ASME B16.5 Class 150 Socket Weld 4″ 275 psi
ASME B16.5 Class 300 Slip On 1/2″ 720 psi
ASME B16.5 Class 300 Slip On 1/2″ 720 psi
ASME B16.5 Class 300 Slip On 1″ 720 psi
ASME B16.5 Class 300 Slip On 1″ 720 psi
ASME B16.5 Class 300 FNPT 1-1/4″ 720 psi
ASME B16.5 Class 300 Slip On 1-1/4″ 720 psi
ASME B16.5 Class 300 Slip On 1-1/2″ 720 psi
ASME B16.5 Class 300 Slip On 1-1/2″ 720 psi
ASME B16.5 Class 300 Slip On 2″ 720 psi
ASME B16.5 Class 300 Slip On 2″ 720 psi
ASME B16.5 Class 300 Slip On 2-1/2″ 720 psi
ASME B16.5 Class 300 Slip On 2-1/2″ 720 psi
ASME B16.5 Class 300 Slip On 3″ 720 psi
ASME B16.5 Class 300 Slip On 3″ 720 psi
ASME B16.5 Class 300 Slip On 4″ 720 psi
ASME B16.5 Class 300 Slip On 4″ 720 psi

Pressure Rating Of Titanium Alloy Gr.5 Flanges

ANSI/ASME B16.34 PRESSURE RATING CHART
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

Size Chart Of Titanium Gr.5 Flange

Nominal Pipe Size Outside Diameter of Flanges Thickness of Flanges Diameter of Raised Face Diameter of Hub at Base Length Thru Hub Diameter or Bore Diameter of Hub at Bevel Radius of Fillet Depth of Socket
Welding Neck Slip-On Threaded Socket Lap Joint Slip-on Socket Lap Joint
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Weight Chart Of Titanium Gr.5 Flanges

Pipe Normal Diam. O.D. Flange  Thk. Of Flange Min  Diam.
of
Hub 		 Diameter of Raised Face  Length Hub.Y Thread Length Diam. 
of Bolt
Circle		 Diam. 
of Bolt
Holes		 Number
of Bolts		 Diam. of
Bolts
(inch)		 KG LB
inch dn O C X G Y T BC BH BN BD
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" Gr.2 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
10" 250 406.50 30.20 600.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
16" Gr.2 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167
24" 600 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214

Ready Stock Titanium Gr.5 Flanges

  • Titanium Gr.5 Screwed Flanges In Indonesia
  • Titanium Alloy Gr.5 Reducing Flanges In Malaysia
  • ASTM B381 Titanium Alloy Gr.5 SORF Flange
  • Titanium Alloy Gr.5 Flanges In Mexico
  • Titanium Alloy Gr.5 BLRF Flange In Philippines
  • Titanium Gr.5 Flanges Manufacturer
  • Titanium Gr.5 Threaded Flanges In Japan
  • ASME B16.5 Titanium Gr.5 Spectacle Blind Flanges
  • Titanium Gr.5 EN 1092-1 Flange
  • UNS N56400 Flanges
  • ASTM B381 Titanium Gr.5 Plate Flanges
  • Titanium Gr.5 DIN 2566 PN10 Flanges Stockholder
  • ASME SB381 Titanium Gr.5 Forged Flanges
  • Titanium Gr.5 Pipe Flanges In Italy
  • Titanium Alloy Gr.5 Blind Flanges Supplier in Mumbai
  • Titanium Gr.5 BLRF Flange In Spain
  • ASTM B381 Titanium Alloy Gr.5 Socket weld Flanges
  • 3.7165 SWRF Flange
  • Titanium Gr.5 Raised Face Flanges Exporter
  • Class 150 Titanium Gr.5 Pipe Flange
  • Titanium Alloy Gr.5 Orifice Flanges In Kuwait
  • ANSI B16.5 Titanium Gr.5 PN16 Flanges
  • Ti Alloy Gr.5 JIS B2220 Flange
  • Titanium JIS NCF Gr.5 Class 2500 Flange
  • 6 Inch Titanium Gr.5 Pipe Flanges
  • Titanium Gr.5 Flat Flanges In Singapore
  • Titanium Gr.5 Tongue & Groove Flanges In Indonesia
  • Titanium Gr.5 Paddle Spacer Flanges
  • Ti Alloy Gr.5 JIS B2220 Flange
  • ASTM B381 Titanium Alloy Gr.5 Expander Flanges
  • ASME B16.5 Titanium Gr.5 Slip on Flanges
  • Titanium Alloy Gr.5 DN150 PN16 Flange
  • ANSI B16.5 Titanium Gr.5 Male & Female Flanges
  • Titanium Gr.5 Slip On Flanges Distributor
  • Titanium Alloy Gr.5 AWWA C207 Flange Stockist
  • Titanium Gr.5 Lapped Joint Flanges In Malaysia
  • Titanium Gr.5 BS 4504 Flanges
  • Ti Alloy Gr.5 Lap Joint Flanges In Mexico
  • 3 inch Titanium Gr.5 Welding Neck 300 LBS Flange
  • Titanium Gr.5 Long Weld Neck Flanges
  • Ti Alloy Gr.5 Square Flanges In Philippines
  • Titanium Gr.5 JIS B2220 Flange
  • Titanium Gr.5 WNRF Flange In Japan
  • Ti Alloy Gr.5 Blind Flange In Italy
  • Titanium Alloy Gr.5 BS 4504 Flanges
  • DIN 3.7165 Pipe Flanges
  • Titanium Gr.5 Welding Neck Flanges In Spain
  • Gr.5 Titanium RTJ Flanges Manufacturer
  • Titanium Gr.5 Ring Type Joint Flanges In Kuwait
  • Titanium Gr.5 Large Diameter Flanges
  • Titanium Alloy Gr.5 High Hub Blind Flanges
  • Titanium Alloy Gr.5 Loose Flanges In Singapore

Titanium Gr.5 Flanges Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min

Titanium Alloy Gr.5 Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Export Destinations For Titanium Alloy Gr.5 Pipe Flanges

industry