• Shop No 6 , 23/A C.P Tank Road, Mumbai 400004.
  • Talk With Our Experts +91 9011334411

Super Duplex S32750 / S32760 Fasteners

ASTM B479 Super Duplex S32750 Washers, Super Duplex 2507 Bolts In Japan, Super Duplex Steel S32750 Nuts, SDSS S32750 Fasteners, Super Duplex UNS S32760 Stud Bolts Price in India.

Bagoda Steel is a distinguished manufacturer of Super Duplex Steel UNS S32750 / S32760 Fasteners, which is a wrought nickel base alloy with superb excessive temperature strength and oxidation resistance. It is often used in pin and hanger enlargement joints for bridges - higher corrosion, galling-resistance, low temperature toughness, & excessive chirpy values at sub-zero temps as compared to the steels typically used. All of the product paperwork is superb in phrases of forming and welding. Although it is in general referred to for warmth and oxidation resistance it additionally has appropriate resistance to chloride strain-corrosion cracking and has appropriate resistance to carburization, superb resistance to lowering or carburizing atmospheres. Super Duplex 2507 Fasteners is one of the maximum extensively used nickel base superalloys for fueloline turbine engine additives.

Industrial Product
Super Duplex Steel S32750 / S32760 fasteners

Super Duplex Steel S32750 Hex Bolts In Mexico, 1.4410 Nuts, SAF 2507 Flat Washers, Super Duplex Stainless Steel 2507 Screws, UNS S32760 Allen Cap Screw, Super Duplex Steel S32750 Anchor Bolts In Singapore, SDSS S32750 Threaded Rod, Super Duplex S32750 Carriage Bolts Stockist Supplier in Mumbai, India.

+91 22 - 66151721
sales@bagodasteelproject.com
+91 9011334411

It has no yield or tensile strength requirements, however it does require hardness most and strain rupture minimums. With strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C), it is a stable solution strengthened grade has appropriate strength and oxidation resistance as much as 2200 Deg. F (1200 Deg. C). It excels in each aspect because of the formation of a protective, tenacious oxide film. Alloy 2507 Fasteners additionally resists carburization and nitriding, not unusual place situations which regularly cause early failure in excessive-temperature alloys. It is used in petrochemical method device and fueloline generators within the warm combustor sector sections. Also used for structural additives in business furnace applications due to the superb oxidation resistance.

It is usually recommended in particular to be used in furnace applications as it has uncommon resistance to oxidizing, lowering, and impartial atmospheres. Furnace rolls fabricated from this alloy have been nonetheless in appropriate situation after running for 8700 hours at 2150 Deg. F. Furnace trays, used to aid heavy loads, had been uncovered to temperatures as much as 2300 Deg. F. in an oxidizing ecosystem without bending or warping. Super Duplex Steel WNR 1.4501 Fasteners is similarly appropriate to be used in jet engine tailpipes, afterburner additives, turbine blades, nozzle vanes, cabin heaters, and different plane parts.

Material Specification Chart of Super Duplex Steel S32750 / S32760 Fasteners

Standard ASTM B479, ASME SB479
Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head Drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

ANSI and/or ASME Standards (inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Various Types Of Super Duplex Steel S32750 / S32760 Fasteners

Super Duplex Steel S32750 / S32760 Bolts
Super Duplex Steel S32750 / S32760 Bolts
  • ASME SB479 Super Duplex Steel Steel S32750 Bolts
  • ASTM B479 Super Duplex S32750 Bolts
  • 1.4410 Heavy Hex Bolts
  • SDSS S32750 Hex Bolts In Indonesia
  • Super Duplex Stainless Steel 2507 Bolts In Malaysia
  • UNS S32760 Flange Bolts
Super Duplex Steel S32750 / S32760 Nuts
Super Duplex Steel S32750 / S32760 Nuts
  • UNS S32205 Nuts
  • Super Duplex Steel S32750 Wing Nuts In Mexico
  • SDSS S32750 Hex Nuts In Philippines
  • ASME SB479 Super Duplex Steel S32750 Nuts
  • 1.4410 Heavy Hex Nuts
  • ASTM B479 Super Duplex S32750 Nuts
Super Duplex Steel S32750 / S32760 Screw
Super Duplex Steel S32750 / S32760 Screw
  • Super Duplex Steel Steel S32750 Screw In Japan
  • ASTM B479 Super Duplex Steel S32750 Screw
  • UNS S32205 Socket Set Screws
  • SDSS S32750 Allen Cap Screw In Italy
  • 1.4410 Hex Cap Screws
  • ASME SB479 Duplex S32750 Screw
Super Duplex Steel S32750 / S32760 Washers
Super Duplex Steel S32750 / S32760 Washers
  • SDSS S32750 Flat Washer In Spain
  • 1.4410 Beveled Washers
  • ASME SB479 Super Duplex S32750 Washers
  • Super Duplex Steel S32750 Washers In Kuwait
  • UNS S32205 Lock Washers
  • ASTM B479 Super Duplex Steel S32750 Washers
Super Duplex Steel S32750 / S32760 Threaded Rods
Super Duplex Steel S32750 / S32760 Threaded Rods
  • SDSS S32750 Threaded Rods In Singapore
  • ASME SB479 Super Duplex S32750 Threaded Rods
  • UNS S32205 Threaded Rods
  • 1.4410 Threaded Rods
  • Super Duplex Steel S32750 Threaded Rods In Indonesia
  • ASTM B479 Super Duplex S32750 Threaded Rods
Super Duplex Steel S32750 / S32760 Stud Bolts
Super Duplex Steel S32750 / S32760 Stud Bolts
  • UNS S32205 Stud Bolts
  • SDSS S32750 Stud Bolts In Indonesia
  • ASTM B479 Super Duplex Steel S32750 Stud Bolts
  • ASME SB479 Super Duplex S32750 Stud
  • Super Duplex Steel S32750 Tie Rods In Singapore
  • 1.4410 Stud Bolts
Super Duplex Steel S32750 / S32760 Anchor Bolts
Super Duplex Steel S32750 / S32760 Anchor Bolts
  • 1.4410 J Anchor Bolts
  • ASTM B479 Super Duplex S32750 Anchor Bolts
  • UNS S32205 Concrete Anchors
  • DSS S32750 Wedge Anchor Bolt In Malaysia
  • ASME SB479 Super Super Duplex S32750 Self Tapping Anchor
  • Super Duplex Steel S32750 Anchor Bolts In Kuwait

Equivalent Grades of Super Duplex Steel S32750 / S32760 Fasteners

STANDARD WERKSTOFF NR. UNS
Super Duplex Steel 2507 1.4410 S32750
Super Duplex Steel 2507 1.4501 S32760
Fasteners Dimensions

View Size Table Of Super Duplex Steel Steel S32750 Fasteners, We have Global sales network for Super Duplex Steel S32750 Stud Bolts, Wide Stockist Of Werkstoff No 1.4410 Nuts, Bolts, Washers In India.

Size Chart of Super Duplex S32750 / S32760 Bolts

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Check available Sizes of ASME SB 479 Super Duplex Steel Steel S32750 Stud Bolt, Ask For Ready Stock of UNS S32760 Fasteners in Mumbai, India.

BAGODA

Quick Contact

Super Duplex Steel S32750 / S32760 Washer Weight & Dimensions

Bolt Size A B C Weight (lbs.) Per 100 Pieces
ID OD Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

Super Duplex Steel S32750 / S32760 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4 –
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2 –
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Ready Stock Super Duplex Steel S32750 / S32760 Fasteners

  • Super Duplex S32750 Foundation Bolts Manufacturer
  • SDSS S32750 Elevator Bolt In Indonesia
  • 1.4410 Fasteners
  • Super Duplex Steel S32750 Dock Washer Stockholder
  • DIN 1.4410 Countersunk Washer
  • S32750 Super Duplex Customized Washer
  • ASME SB479 Grade S32750 Super Duplex Fender Washer
  • Super Duplex Steel UNS S32750 Eye Bolts In Malaysia
  • Grade S32750 Super Duplex Steel Heavy Hex Nuts
  • Super Duplex S32750 Hex Domed Cap Nuts In Mexico
  • UNS S32760 Fasteners
  • SDSS S32750 Machine Bolt
  • Super Duplex S32750 Wing Nuts In Philippines
  • Super Duplex UNS S32760 Heavy Hex Bolts
  • 2507 Super Duplex Screws Distributor
  • Super Duplex S32750 Structural Bolts In Japan
  • Super Duplex Steel S32750 Hex Head Bolt
  • SDSS S32750 Allen Cap Screw
  • ASTM B479 Super Duplex Steel Fasteners
  • S32750 Duplex Steel Coupling Nut
  • Super Duplex Steel UNS S32750 Split / Lock Washer
  • Super Duplex Stainless Steel 2507 Bolts
  • Super Duplex Steel S32750 Hexagonal Washer In Italy
  • DSS S32750 Hex Washers In Spain
  • Super Duplex S32750 Self Locking Nuts
  • Super Duplex UNS S32750 Tooth Lock Washer
  • Super Duplex Steel S32750 Acorn Nuts
  • SDSS S32750 Ogee Washer In Kuwait
  • S32750 Super Duplex Steel T-Head Bolts
  • Super Duplex S32750 Lock Nut In Singapore
  • Super Duplex S32750 Anchor Bolts
  • Super Duplex UNS S32750 Double Ended Stud In Indonesia
  • Super Duplex S32750 Flange Bolt
  • JIS NCF S32750 Stud Bolts
  • Super Duplex S32750 Fasteners In Malaysia
  • Super Duplex UNS S32750 Hex Set Screw Manufacturer
  • S32750 Super Duplex Steel Steel Concrete Screw In Italy
  • Grade S32750 Super Duplex Steel Hex Head Bolts
  • SDSS S32750 Plain Washer Supplier in Mumbai
  • SDSS 2507 Machine Fasteners Exporter
  • Super Duplex Steel S32750 Tie Rods In Mexico
  • Super Duplex S32750 Stud Bolts In Philippines
  • SAF 2507 Bolts
  • ASTM B479 Super Duplex S32750 Flat Washers
  • Grade S32750 Super Duplex Washers
  • ASTM B479 Super Duplex Steel UNS S32750 Nyloc Nuts
  • Grade S32750 Super Duplex Square Nuts
  • ASTM B479 Super Duplex S32750 Wing Nuts
  • Super Duplex Steel UNS S32750 Threaded Rod
  • S32750 Super Duplex Steel Carriage Bolt Stockist
  • Grade S32750 Super Duplex Socket Cap Screw
  • Super Duplex S32750 Hex Coupling Nut In Japan

Super Duplex S32750 / S32760 Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min

Super Duplex S32750 / S32760 Fasteners Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
2507 7.8 g/cm3 1350 °C (2460 °F) Psi – 116000, MPa – 800 Psi – 80000, MPa – 550 15 %

Export Destinations For Super Duplex S32750 / S32760 Fasteners

industry