UNS C70600 Fender Washer, Copper Nickel 90 / 10 Split Washers, Cupro Nickel 90 / 10 Tooth Lock Washer Stockist, CuNi 90 / 10 Square Washer, Cu-Ni 90 / 10 Dome Washers, 2.0872 Belleville Washers, Cu-Ni 90 / 10 Ogee Washers, Copper Nickel 90 / 10 Lock Washers Supplier in Mumbai, India.
Typical applications encompass valves and pumps; pump and propeller shafts, fueloline tanks and crude petroleum stills, electric and digital components, etc. It is advanced to many different excessive temperature alloys beneathcyclic heating and cooling conditions. The nickel-chromium matrix of these washers is strengthened through the addition of molybdenum and niobium that is alloyed thru stable solution strengthening. And this lets in it to preserve excessive strength and durability at temperatures starting from cryogenic as much as 2000 Degree F (1093 Degree C). Copper Nickel WNR 2.0872 Wire Spring Washers is immune to pitting, crevice corrosion, impingement corrosion, inter-granular assault and is nearly proof against chloride strain corrosion cracking.
Applications encompass thermocouple safety tubes, condenser tubes, system heaters, catalyst helps in nitric acid manufacture, superheater tube helps, ash coping by means of having in strength era and exhaust structures in fueloline engines and combustion chambers. It isn't embrittled through lengthy publicity to excessive temperatures, way to the nickel, chromium and aluminum contents that collectively shape a protecting and adherent oxide film. Copper Nickel UNS C70600 Flat Spring Washers can perform from cryogenic temperatures as much as 645 Degree F (340 Degree C). Thanks to this precise composition, it's far famous in some of important worldwide industries including: chemical, thermal, and petrochemical processing.
Material Specification Chart of Copper Nickel 90 / 10 Washers
| Size | M02 to M33, Custom Sizes |
|---|---|
| Length | 3 mm to 200 mm |
| Washer | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Washers | DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1 |
| Form of Washers | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Washers | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Washers | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Packing of Washers | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Washers Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Types | Plain / Flat Washer, Spring Washers, Dome Washer, Hexagonal Washer, Square Washer, Dome Tooth Washer, Countersunk Washer, Tooth Lock Washer, Dock Washer, Fender Washer, Ogee Washer, Hex Washers, Split / Lock Washer, Customized Washer, Tab Washers |
Various Types Of Copper Nickel 90 / 10 Washers
Copper Nickel 90 / 10 Flat Washers
- Copper Nickel 90 / 10 Thick Flat Washer
- CuNi 90 / 10 Flat Washer
- 2.0872 Flat Washer
- UNS C70600 Plain Washer
- Cu-Ni 90 / 10 Knurled Flat Washer
- Copper Nickel 90 / 10 Thin Flat Washer
Copper Nickel 90 / 10 Ogee Washers
- Copper Nickel 90 / 10 Ogee Washer
- Cu-Ni 90 / 10 Ogee Washer
- Cupro Nickel 90 / 10 Thick Ogee Washer
- CuNi 90 / 10 Thin Ogee Washer
- UNS C70600 Ogee Washer
- 2.0872 Ogee Washer
Copper Nickel 90 / 10 Lock Washers
- Cupro Nickel 90 / 10 Split Lock Washer
- Cu-Ni 90 / 10 Lock Washer
- CuNi 90 / 10 Lock Washer
- Copper Nickel 90 / 10 Heavy Duty Lock Washers
- UNS C70600 Lock Washer
- 2.0872 Internal Tooth Lock Washer
Copper Nickel 90 / 10 Spring Washers
- CuNi 90 / 10 Spring Washers
- Cupro Nickel 90 / 10 Spring Washer
- Cu-Ni 90 / 10 Wave Spring Washer
- 2.0872 Helical Spring Washer
- Copper Nickel 90 / 10 Flat Spring Washer
- UNS C70600 Spring Washers
Copper Nickel 90 / 10 Star Washers
- Cupro Nickel 90 / 10 Star Spring Washer
- 2.0872 Spring Washer
- UNS C70600 Internal Star Washer
- CuNi 90 / 10 Spring Washer
- Cu-Ni 90 / 10 Spring Washer
- Copper Nickel 90 / 10 External Star Washer
Copper Nickel 90 / 10 Fender Washers
- 2.0872 Fender Washer
- Copper Nickel 90 / 10 Standard Fender Washer
- CuNi 90 / 10 Fender Washer
- Cupro Nickel 90 / 10 Spring Steel Fender Washer
- Cu-Ni 90 / 10 Fender Washer
- UNS C70600 Heavy Duty Fender Washer
Equivalent Grades of Copper Nickel 90 / 10 Washers
| STANDARD | WERKSTOFF NR. | UNS |
| Copper Nickel 70/30 | 2.0872 | C70600 |
View Size Table Of Copper Nickel 90 / 10 Washers, We have Global sales network for CuNi 90 / 10 Plain Washer, Wide Stockist Of Werkstoff No 2.0872 Spring Washers In India.
Size Chart of Copper Nickel 90 / 10 Washers
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | – | – | – | 3/32″ | 1/4″ | 0.020″ |
| #4 | – | – | – | 1/8″ | 5/16″ | 0.032″ |
| #6 | – | – | – | 5/32″ | 3/8″ | 0.049″ |
| #8 | – | – | – | 3/16″ | 7/16″ | 0.049″ |
| #10 | – | – | – | 7/32″ | 1/2″ | 0.049″ |
| #12 | – | – | – | 1/4″ | 9/16″ | 0.065″ |
| 1/4″ | 5/16″ | 0.734″ | 0.065″ | 9/32″ | 5/8″ | 0.065″ |
| 5/16″ | 3/8″ | 7/8″ | 0.083″ | 11/32″ | 11/16″ | 0.065″ |
| 3/8″ | 7/16″ | 1″ | 0.083″ | 13/32″ | 13/16″ | 0.065″ |
| 7/16″ | 1/2″ | 1-1/4″ | 0.083″ | 15/32″ | 15/16″ | 0.065″ |
| 1/2″ | 9/16″ | 1-3/8″ | 0.109″ | 17/32″ | 1-1/16″ | 0.095″ |
| 9/16″ | 5/8″ | 1-15/32″ | 0.109″ | 19/32″ | 1-5/32″ | 0.095″ |
| 5/8″ | 11/16″ | 1-3/4″ | 0.134″ | 21/32″ | 1-5/16″ | 0.095″ |
| 3/4″ | 13/16″ | 2″ | 0.148″ | 13/16″ | 1-15/32″ | 0.134″ |
| 7/8″ | 15/16″ | 2-1/4″ | 0.165″ | 15/16″ | 1-3/4″ | 0.134″ |
| 1″ | 1-1/16″ | 2-1/2″ | 0.165″ | 1-1/16″ | 2″ | 0.134″ |
| 1-1/8″ | 1-1/4″ | 2-3/4″ | 0.165″ | – | – | – |
| 1-1/4″ | 1-3/8″ | 3″ | 0.165″ | – | – | – |
| 1-3/8″ | 1-1/2″ | 3-1/4″ | 0.180″ | – | – | – |
| 1-1/2″ | 1-5/8″ | 3-1/2″ | 0.180″ | – | – | – |
| 1-5/8″ | 1-3/4″ | 3-3/4″ | 0.180″ | – | – | – |
| 1-3/4″ | 1-7/8″ | 4″ | 0.180″ | – | – | – |
| 2″ | 2-1/8″ | 4-1/2″ | 0.213″ | – | – | – |
Check available Sizes of Copper Nickel 90 / 10 Washers, Ask For Ready Stock of UNS C70600 Washers in Mumbai, India.
BAGODA
Quick Contact
Dimensions of Cu-Ni 90 / 10 Spring Washer
| NOM SIZE | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 320.00 |
Dimensions of Cu-Ni 90 / 10 Flat Washer
| Bolt Size | USS | SAE | ||||
| OD (in.) | ID (in.) | Thickness | OD (in.) | ID (in.) | Thickness | |
| 1/8 (#6) | – | – | – | 0.375 | 0.156 | .036/.065 |
| 5/32 (#8) | – | – | – | 0.438 | 0.188 | .036/.065 |
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | – | – | – | 0.562 | 0.250 | .051/.080 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | – | – | – |
| 1 3/4 | 4.000 | 1.875 | .153/.213 | – | – | – |
| 1 7/8 | 4.250 | 2.000 | .153/.213 | – | – | – |
| 2 | 4.500 | 2.125 | .153/.213 | – | – | – |
| 2 1/4 | 4.750 | 2.375 | .320/.248 | – | – | – |
| 2 1/2 | 5.000 | 2.625 | .210/.280 | – | – | – |
| 2 3/4 | 5.250 | 2.875 | .228/.410S | – | – | – |
| 3 | 5.500 | 3.125 | .249/.327 | – | – | – |
Weight Chart Of Cu-Ni 90 / 10 Washers
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE | TAPER | WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Ready Stock Copper Nickel 90 / 10 Washers
- CuNi 90 / 10 Ogee Washer
- Cupro Nickel 90 / 10 Fender Washer
- CuNi 90 / 10 Spring Washers Distributor
- Cupro Nickel 90 / 10 Belleville Washers
- CuNi 90 / 10 Hexagonal Washer
- CuNi 90 / 10 Hex Washers
- Copper Nickel 90 / 10 Tab Washers
- CuNi 90 / 10 Split Washer
- CuNi 90 / 10 Plain Washer Supplier in Mumbai
- Cupro Nickel 90 / 10 Tooth Lock Washer
- UNS C70600 Washers
- CuNi 90 / 10 Cup Washer
- Copper Nickel 90 / 10 Hexagonal Washer
- Copper Nickel 90 / 10 Split / Lock Washer
- Cupro Nickel 90 / 10 Finishing Washers
- Cupro Nickel 90 / 10 Hex Washers
- Copper Nickel 90 / 10 Dock Washer
- CuNi 90 / 10 Countersunk Finishing Washer
- Cupro Nickel 90 / 10 Conical Spring Washer
- Copper Nickel 90 / 10 Wave Washer
- CuNi 90 / 10 Round Washer
- CuNi 90 / 10 Hex Washers
- Cupro Nickel 90 / 10 Square Washer
- 2.0872 Machine Washer
- Copper Nickel 90 / 10 Fender Washer
- Copper Nickel 90 / 10 Spring Washers
- Cu-Ni 90 / 10 Customized Washer
- Cu-Ni 90 / 10 Industrial Washers
- DIN 2.0872 Countersunk Washer
- Cupro Nickel 90 / 10 Split Ring Washer
- CuNi 90 / 10 Curved Spring Washer
- Copper Nickel 90 / 10 Dock Washer Stockholder
- Cu-Ni 90 / 10 Washer
- Copper Nickel 90 / 10 Industrial Washers
- Cupro Nickel 90 / 10 Spherical Washer
- Copper Nickel 90 / 10 Customized Washer
- Copper Nickel 90 / 10 Countersunk Washer
- Copper Nickel 90 / 10 Punched Washer
- Copper Nickel 90 / 10 Tab Washer Exporter
- Cupro Nickel 90 / 10 Square Washer Manufacturer
- Copper Nickel 90 / 10 Star Washers
- Copper Nickel 90 / 10 Flat Washers
- Cupro Nickel 90 / 10 Tab Washer Manufacturer
- Cu-Ni 90 / 10 Flat Washer Stockist
- Copper Nickel 90 / 10 Spring Washers
- Cu-Ni 90 / 10 Flat Washer
- Copper Nickel 90 / 10 Washers
- Copper Nickel 90 / 10 Dome Washer
- Copper Nickel 90 / 10 Dome Tooth Washer
- CuNi 90 / 10 Fender Washers
Copper Nickel 90 / 10 Washers Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 70-30 | 65.0 min | 1 max | .05 max | 29-33 | 0.4-1.0 | 1 max |
Cu-Ni 90 / 10 Washers Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Copper Nickel 70-30 | 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
