Inconel 600 Fasteners, Alloy 600 Bolts, Inconel Alloy 600 Nuts Manufacturer

Inconel 600 Flat Washers In Malaysia, 2.4816 Nuts, Nickel Alloy 600 Threaded Rod, Inconel 600 Hex Bolts, UNS N06600 Allen Cap Screw, Alloy 600 Anchor Bolts In Kuwait, Inconel® Alloy 600 Carriage Bolts Stockist, Alloy 600 Screws Supplier in Mumbai, India.

Inconel Alloy WNR 2.4816 Fasteners have been robotically eliminated from the fueloline circulate each half-hour and fan-cooled to close to ambient temperature after which reinserted into the flame tunnel.The alloys defined here work harden unexpectedly for the duration of machining and require greater strength to reduce than do the apparent carbon steels. The metallic is ‘gummy,’ with chips that have a tendency to be stringy and tough. It mainly generally tend to gall and weld to the device reducing edges, dashing up device put on and failure.It is usedin an air jet directed at the device whilst dry reducing, to seriously growth device life.Sulfur chlorinated petroleum oil lubricants are recommended for all alloys however titanium.

Machine gear have to be inflexible and used to no greater than in their rated capacity. Both work piece and device have to be held rigidly; device overhang have to be minimized. Rigidity is especially essential whilst machining titanium, as Nickel Alloy 600 Fastener shas a miles decrease modulus of elasticity than metal alloys. Slender work portions of titanium generally tend to deflect below device pressures inflicting chatter, device rubbing and tolerance problems.Make certain that gear are constantly sharp. Change to sharpened gear at ordinary durations instead of out of necessity. Such lubricants can be thinned with paraffin oil for end cuts at better speeds.

Material Specification Chart of Inconel 600 Fasteners

Standard	ASTM B166, ASME SB166
Size	M 02 to M 33
Length	3 mm to 200 mm
Threads:	METRIC, BSW, BSF, UNC, UNF or as required
Standard:	DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute ANSI B 18.2.4 2M ANSI B 28.2.4 1M Stud Bolt length are defined in ASME B16.5 standard Hex nuts are defined in ASME B18.2.2 ASME B18.5 BS en iso 3506 DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Scope of Manufacturer	Up to M36 / 1-1/2” Dia, up to 1100mm lg CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia	M6 to M64 (1/4" - 2.5")
Length	12 MM - 500 MM (Upto 20 Inch)
IS	1363, 1364
DIN	931, 933
ISO	ISO 3506
Form of:	Hex, Square, Round, Threading as per Gauge Etc.
Head Drive:	Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate:	Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing:	Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production Process	M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Types	Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

ANSI and/or ASME Standards (inch series)

ASME B18.1.1	Small Solid Rivets	ASME B18.8.1	Clevis Pins and Cotter Pins
ASME B18.1.2	Large Rivets	ASME B18.8.2	Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1	Square and Hex Bolts and Screws	ASME B18.9	Plow Bolts
ASME B18.2.2	Square and Hex Nuts	ASME B18.10	Track Bolts and Nuts
ASME B18.2.6	Fasteners for use in Structural Applications	ASME B18.11	Miniature Screws
ASME B18.3	Socket Cap, Shoulder and Set Screws	ASME B18.13	Screws and Washer Assemblies (Sems)
ASME B18.5	Round Head Bolts	ASME B18.15	Forged Eyebolts
ASME B18.6.2	Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws	ASME B18.17	Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3	Machine Screws and Machine Screws Nuts	ASME B18.21.1	Lock Washers
ASME B18.6.4	Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws	ASME B18.22.1	Plain Washers
ASME B18.7	General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps	ASME B18.23.1	Beveled Washers

Various Types Of Inconel 600 Fasteners

Inconel 600 Bolts

Alloy 600 Hex Bolts In Indonesia
Inconel 600 Bolts In Malaysia
UNS N06600 Flange Bolts
ASTM B166 Inconel 600 Bolts
ASME SB166 Inconel Alloy 600 Bolts
2.4816 Heavy Hex Bolts

Inconel 600 Nuts

UNS N06600 Nuts
ASME SB166 Inconel Alloy 600 Nuts
2.4816 Heavy Hex Nuts
Inconel 600 Wing Nuts In Mexico
ASTM B166 Inconel 600 Nuts
Alloy 600 Hex Nuts In Philippines

Inconel 600 Screw

Inconel 600 Screw In Japan
ASTM B166 Inconel 600 Screw
ASME SB166 Inconel Alloy 600 Screw
2.4816 Hex Cap Screws
Alloy 600 Allen Cap Screw In Italy
UNS N06600 Socket Set Screws

Inconel 600 Washers

ASTM B166 Inconel 600 Washers
ASME SB166 Inconel Alloy 600 Washers
2.4816 Beveled Washers
Alloy 600 Flat Washer In Spain
Inconel 600 Washers In Kuwait
UNS N06600 Lock Washers

Inconel 600 Threaded Rods

Inconel 600 Threaded Rods In Singapore
UNS N06600 Threaded Rods
Alloy 600 Threaded Rods In Indonesia
ASME SB166 Inconel Alloy 600 Threaded Rods
2.4816 Threaded Rods
ASTM B166 Inconel 600 Threaded Rods

Inconel 600 Stud Bolts

ASME SB166 Inconel Alloy 600 Stud
ASTM B166 Inconel 600 Stud Bolts
Inconel 600 Tie Rods In Malaysia
UNS N06600 Stud Bolts
Alloy 600 Stud Bolts In Spain
2.4816 Stud Bolts

Inconel 600 Anchor Bolts

Inconel 600 Anchor Bolts In Mexico
UNS N06600 Concrete Anchors
Inconel 600 Wedge Anchor Bolt In Italy
2.4816 J Anchor Bolts
ASME SB166 Inconel 600 Self Tapping Anchor
ASTM B166 Inconel 600 Anchor Bolts

Equivalent Grades of Inconel 600 Fasteners

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST	OR
Inconel 600	N06600	2.4816	NC15FE11M	NiCr15Fe	NCF 600	NA 13	МНЖМц 28-2,5-1,5	ЭИ868

View Size Table Of Inconel 600 Fasteners, We have Global sales network for Inconel 600 Stud Bolts, Wide Stockist Of Werkstoff No 2.4816 Nuts, Bolts, Washers In India.

Size Chart of Inconel 600 Bolts

Nominal or Basic Product Diameter		E		F			G		H			J	LT (Thread Length)		Y
Nominal or Basic Product Diameter		Body Diameter		Width Across Flats			Width Across Corners		Head Height			Wrenching Height	For Screw Lengths	For Screw Lengths	Transition Thread Length
1/4	0.25	0.25	0.245	7/16	0.438	0.428	0.505	0.488	5/32	0.163	0.150	0.106	0.750	1.000	0.250
5/16	0.3125	0.3125	0.3065	1/2	0.500	0.489	0.577	0.557	13/64	0.211	0.195	0.140	0.875	1.125	0.278
3/8	0.375	0.375	0.369	9/16	0.562	0.551	0.650	0.628	15/64	0.243	0.226	0.160	1.000	1.250	0.312
7/16	0.4375	0.4375	0.4305	5/8	0.625	0.612	0.722	0.698	9/32	0.291	0.272	0.195	1.125	1.375	0.357
1/2	0.5	0.5	0.493	3/4	0.750	0.736	0.866	0.840	5/16	0.323	0.302	0.215	1.250	1.500	0.385
9/16	0.5625	0.5625	0.5545	13/16	0.812	0.798	0.938	0.910	23/64	0.371	0.348	0.250	1.375	1.625	0.417
5/8	0.625	0.625	0.617	15/16	0.938	0.922	1.083	1.051	25/64	0.403	0.378	0.269	1.500	1.750	0.455
3/4	0.75	0.75	0.741	1-1/8	1.125	1.100	1.299	1.254	15/32	0.483	0.455	0.324	1.750	2.000	0.500
7/8	0.875	0.875	0.866	1-5/16	1.312	1.285	1.516	1.465	35/64	0.563	0.531	0.378	2.000	2.250	0.556
1	1	1	0.99	1-1/2	1.500	1.469	1.732	1.675	39/64	0.627	0.591	0.416	2.250	2.500	0.625
1-1/8	1.125	1.125	1.114	1-11/16	1.688	1.631	1.949	1.859	11/16	0.718	0.658	0.461	2.500	2.750	0.714
1-1/4	1.25	1.25	1.239	1-7/8	1.875	1.812	2.165	2.066	25/32	0.813	0.749	0.530	2.750	3.000	0.714
1-1/2	1.5	1.5	1.488	2-1/4	2.250	2.175	2.598	2.480	15/16	0.974	0.902	0.640	3.250	3.500	0.833

Check available Sizes of ASME SB 166 Inconel 600 Stud Bolt, Ask For Ready Stock of UNS N06600 Fasteners in Mumbai, India.

BAGODA

Quick Contact

Call Us

+91 22 - 66151721

Need Help? Send us Email

sales@bagodasteelproject.com

Inconel 600 Washer Weight & Dimensions

Bolt Size	A	B	C	Weight (lbs.) Per 100 Pieces
Bolt Size	ID	OD	Thickness	Weight (lbs.) Per 100 Pieces
1/2	9/16	13/8	0.109	4
5/8	11/16	13/4	0.134	8
3/4	13/16	2	0.148	11
7/8	15/16	21/4	0.165	15
1	11/16	21/2	0.165	19
11/8	11/4	23/4	0.165	22
11/4	13/8	3	0.165	26
13/8	11/2	31/4	0.180	33
11/2	15/8	31/2	0.180	38
15/8	13/4	33/4	0.180	43
13/4	17/8	4	0.180	50
17/8	2	41/4	0.180	57
2	21/8	41/2	0.180	63
21/4	23/8	43/4	0.220	83
21/2	25/8	5	0.238	96
23/4	27/8	51/4	0.259	110
3	31/8	51/2	0.284	130

Inconel 600 Stud Bolt Size Chart

Class 150 Flanges ASME B16.5 (Stud bolt sizes)						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 1/2	2 3/8	5/8	4	1/2	2 1/4	–
3/4	3 7/8	2 3/4	5/8	4	1/2	2 1/2	–
1	4 1/4	3 1/8	5/8	4	1/2	2 1/2	3
1 1/4	4 5/8	3 1/2	5/8	4	1/2	2 3/4	3 1/4
1 1/2	5	3 7/8	5/8	4	1/2	2 3/4	3 1/4
2	6	4 3/4	3/4	4	5/8	3 1/4	3 3/4
2 1/2	7	5 1/2	3/4	4	5/8	3 1/2	4
3	7 1/2	6	3/4	4	5/8	3 1/2	4
3 1/2	8 1/2	7	3/4	8	5/8	3 1/2	4
4	9	7 1/2	3/4	8	5/8	3 1/2	4
5	10	8 1/2	7/8	8	3/4	3 3/4	4 1/4
6	11	9 1/2	7/8	8	3/4	4	4 1/2
8	13 1/2	11 3/4	7/8	8	3/4	4 1/4	4 3/4
10	16	14 3/4	1	12	7/8	4 1/2	5
12	19	17	1	12	7/8	4 3/4	5 1/4
14	21	18 3/4	1 1/8	12	1	5 1/4	5 3/4
16	23 1/2	21 1/4	1 1/8	16	1	5 1/4	5 3/4
18	25	22 3/4	1 1/4	16	1 1/8	5 3/4	6 1/4
20	27 1/2	25	1 1/4	20	1 1/8	6 1/4	6 3/4
24	32	29 1/2	1 1/4	20	1 1/4	6 3/4	7 1/4
Class 300 Flanges ASME B16.5						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 3/4	2 5/8	5/8	4	1/2	2 1/2	3
3/4	4 5/8	3 1/4	3/4	4	5/8	3	3 1/2
1	4 7/8	3 1/2	3/4	4	5/8	3	3 1/2
1 1/4	5 1/4	3 7/8	3/4	4	5/8	3 1/4	3 3/4
1 1/2	6 1/8	4 1/2	7/8	4	3/4	3 1/2	4
2	6 1/2	5	3/4	8	5/8	3 1/2	4
2 1/2	7 1/2	5 7/8	7/8	8	3/4	4	4 1/2
3	8 1/4	6 5/8	7/8	8	3/4	4 1/4	4 3/4
3 1/2	9	7 1/4	7/8	8	3/4	4 1/4	5
4	10	7 7/8	7/8	8	3/4	4 1/2	5
5	11	9 1/4	7/8	8	3/4	4 3/4	5 1/4
6	12 1/2	10 5/8	7/8	12	3/4	4 3/4	5 1/2
8	15	13	1	12	7/8	5 1/2	6
10	17 1/2	15 1/4	1 1/8	16	1	6 1/4	6 3/4
12	20 1/2	17 3/4	1 1/4	16	1 1/8	6 3/4	7 1/4
14	23	20 1/4	1 1/4	20	1 1/8	7	7 1/2
16	25 1/2	22 1/2	1 3/8	20	1 1/4	7 1/2	8
18	28	24 3/4	1 3/8	24	1 1/4	7 3/4	8 1/4
20	30 1/2	27	1 3/8	24	1 1/4	8	8 3/4
24	36	32	1 5/8	24	1 1/2	9	10

Ready Stock Inconel 600 Fasteners

Inconel 600 Lock Nut In Indonesia
Inconel 600 Wing Nuts In Malaysia
Nickel Alloy 600 Screws Distributor
Inconel Alloy® 600 Washers
Inconel 600 Anchor Bolts In Mexico
Nickel Alloy 600 Split / Lock Washer
Inconel Alloy 600 Stud Bolts In Philippines
Inconel® Alloy 600 Allen Cap Screw
Inconel Alloy 600 Threaded Rod In Japan
Inconel 600 Tooth Lock Washer
Inconel 600 Heavy Hex Nuts
ASTM B166 Inconel 600 Wing Nuts
Inconel 600 Self Locking Nuts
Alloy 600 Elevator Bolt
Alloy 600 Hexagonal Washer In Italy
600 Inconel Hex Set Screw Manufacturer
Alloy 600 Eye Bolts
Inconel 600 Square Nuts In Spain
ASME SB166 Inconel 600 Fender Washer
Alloy 600 T-Head Bolts In Kuwait
Inconel 600 Dock Washer Stockholder
Alloy 600 Double Ended Stud
Inconel® Alloy 600 Hex Washers In Singapore
Inconel 600 Machine Fasteners Exporter
Nickel Alloy 600 Hex Coupling Nut
Inconel 600 Bolts In Kuwait
600 Inconel Structural Bolts
Inconel 600 Hex Head Bolts In Spain
600 Inconel Customized Washer
ASTM B166 Inconel 600 Nyloc Nuts
Alloy 600 Plain Washer Supplier in Mumbai
600 Inconel Acorn Nuts
Inconel 600 Fasteners In Italy
Nickel Alloy 600 Concrete Screw
Inconel® Alloy 600 Tie Rods
600 Inconel Machine Bolt
UNS N06600 Fasteners
Inconel Alloy 600 Bolts In Japan
ASTM B166 Inconel 600 Fasteners
Inconel Alloy 600 Carriage Bolt Stockist
Alloy 600 Hex Head Bolt In Philippines
Nickel Alloy 600 Hex Domed Cap Nuts
2.4816 Fasteners
Inconel Alloy 600 Socket Cap Screw In Mexico
JIS NCF 600 Stud Bolts
Inconel 600 Heavy Hex Bolts In Indonesia
DIN 2.4816 Countersunk Washer
Inconel 600 Flange Bolt
Inconel® Alloy 600 Foundation Bolts Manufacturer
600 Inconel Ogee Washer
Inconel 600 Coupling Nut In Malaysia
ASTM B166 Inconel 600 Flat Washers

Inconel 600 Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015 max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Alloy 600 Fasteners Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.47 g/cm3	1413 °C (2580 °F)	655 MPa, 95000 psi	310 MPa, 45000 psi	45 %

Inconel 600 Fasteners

Inconel Alloy 600 Fasteners, Inconel 600 Bolts In Indonesia, Alloy 600 Nuts, Inconel® Alloy 600 Stud Bolts, ASTM B166 Inconel 600 Washers Price in India.