Inconel Alloy 601 Serrated Flange Nuts Stockist, Inconel® Alloy 601 Dome Nuts, Nickel Alloy 601 Nyloc Nuts, 2.4851 Nuts, Alloy 601 Self Locking Nuts, Inconel 601 Wing Nuts, Inconel 601 Industrial Nuts, UNS N06601 Acorn Nuts, Inconel 601 Coupling Nuts Supplier in Mumbai, India.
It may be welded the use of not unusual place welding strategies and cast however cannot be hot worked. Cold working can be completed the use of general tooling and gentle die materials for higher end. It is included via way of means of requirements. It is utilized in tablets for transistors and ceramic to steel seals. The nickel, carbon, manganese, iron, silicon & copper percentage stays similar to alloy, however the sulphur is modified. Inconel Alloy WNR 2.4851 Wing Nuts is used mainly for automated screw system inventory and isn't always commonly encouraged for different applications. It combines the superb corrosion resistance feature of alloy in company of the introduced features of extra strength and hardness.
The nickel-copper sulphides attributable to the sulphur in its composition act as chip breakers, however due to these inclusions the floor end of the alloy isn't always as easy as that of other alloys. This alloy shows correct fatigue strength and has exceedingly excessive thermal conductivity. Nickel Alloy 601 T-Nuts is used for seawater condensers, condenser plates, distiller tubes, evaporator and warmth exchanger tubes, and saltwater piping.The elevated properties are acquired via way of means of including aluminium and titanium to the nickel-copper base, and via way of means of heating beneath managed situations in order that sub microscopic debris are induced at some stage in the matrix.
Material Specification Chart of Inconel 601 Nuts
| Standard | ASTM B166, ASME SB166 |
|---|---|
| Size | M 02 to M 33 |
| Length | 3 mm to 200 mm |
| Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
| Scope of Manufacturer |
|
| Dia | M6 to M64 (1/4" - 2.5") |
| Length | 12 MM - 500 MM (Upto 20 Inch) |
| IS | 1363, 1364 |
| DIN | 931, 933 |
| ISO | ISO 3506 |
| Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
| Head Drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
| Production Process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
| Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Inconel 601 Nuts Manufacturing Standards
| DIN Nuts | Hexagon Nuts |
|---|---|
| DIN 315 Nuts | DIN 934 |
| DIN 431 Nuts | BS 1768 |
| DIN 555 Nuts | BS 1769 |
| DIN 557 Nuts | BS 1083 |
| DIN 562 Nuts | BS 3692 |
| DIN 582 Nuts | ISO 4032 |
| DIN 934 Nuts | ISO 4033 |
| DIN 936 Nuts | ANSI B18.2.2 |
| DIN 1587 Nuts | |
| DIN 6923 Nuts |
Various Types Of Inconel 601 Nuts
- Alloy 601 Hex Nuts
- 2.4851 Hex Nuts
- ASME SB166 Inconel Alloy 601 Hex Nuts
- Inconel 601 Hex Nuts
- UNS N06601 Hex Nuts
- ASTM B166 Inconel 601 Hex Nuts
- Nickel Alloy 601 Heavy Hex Nuts
- ASTM B166 Inconel 601 Heavy Hex Nuts
- Alloy 601 Heavy Hex Nuts
- 2.4851 Heavy Hex Nuts
- ASME SB166 Inconel Alloy 601 Heavy Hex Nuts
- UNS N06601 Heavy Hex Nuts
- 2.4851 Acorn Nuts
- Nickel Alloy 601 Acorn Nuts
- UNS N06601 Acorn Nuts
- Alloy 601 Acorn Nuts
- ASME SB166 Inconel Alloy 601 Acorn Nuts
- ASTM B166 Inconel 601 Acorn Nuts
- UNS N06601 Wing Nuts
- Alloy 601 Wing Nuts
- ASTM B166 Inconel 601 Wing Nuts
- 2.4851 Beveled Wing Nuts
- Nickel Alloy 601 Wing Nuts
- ASME SB166 Inconel Alloy 601 Wing Nuts
- Nickel Alloy 601 Serrated Flange Nuts
- ASME SB166 Inconel Alloy 601 Serrated Flange Nuts
- ASTM B166 Inconel 601 Serrated Flange Nuts
- Alloy 601 Serrated Flange Nuts
- UNS N06601 Serrated Flange Nuts
- 2.4851 Serrated Flange Nuts
- ASME SB166 Inconel Alloy 601 Nyloc Nuts
- Alloy 601 Nyloc Nuts
- Nickel Alloy 601 Nyloc Nuts
- 2.4851 Nyloc Nuts
- ASTM B166 Inconel 601 Nyloc Nuts
- UNS N06601 Nyloc Nuts
- Alloy 601 Panel Nuts
- 2.4851 Panel Nuts
- ASTM B166 Inconel 601 Panel Nuts
- UNS N06601 Panel Nuts
- Nickel Alloy 601 Panel Nuts
- ASME SB166 Inconel Alloy 601 Panel Nuts
- ASME SB166 Inconel Alloy 601 Coupling Nuts
- ASTM B166 Inconel 601 Coupling Nuts
- Nickel Alloy 601 Coupling Nuts
- Alloy 601 Coupling Nuts
- 2.4851 Coupling Nuts
- UNS N06601 Coupling Nuts
- UNS N06601 Square Nuts
- ASME SB166 Inconel Alloy 601 Square Nuts
- Nickel Alloy 601 Square Nuts
- ASTM B166 Inconel 601 Square Nuts
- Alloy 601 Square Nuts
- 2.4851 Square Nuts
Equivalent Grades of Inconel 601 Nuts
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
View Size Table Of Inconel 601 Nuts, We have Global sales network for Inconel 601 Heavy Hex Nuts, Wide Stockist Of Werkstoff No 2.4851 Nuts, Hex Head Nuts, Wing Nuts In India.
Size Chart of Inconel 601 Nuts
| Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
| Hex Nut | Jam Nut | Nylock Nut | ||
| 2 | 4 | 1.6 | 1.2 | – |
| 2.5 | 5 | 2 | 1.6 | – |
| 3 | 5.5 | 2.4 | 1.8 | 4 |
| 4 | 7 | 3.2 | 2.2 | 5 |
| 5 | 8 | 4 | 2.7 | 5 |
| 6 | 10 | 5 | 3.2 | 6 |
| 7 | 11 | 5.5 | 3.5 | – |
| 8 | 13 | 6.5 | 4 | 8 |
| 10 | 17 | 8 | 5 | 10 |
| 12 | 19 | 10 | 6 | 12 |
| 14 | 22 | 11 | 7 | 14 |
| 16 | 24 | 13 | 8 | 16 |
| 18 | 27 | 15 | 9 | 18.5 |
| 20 | 30 | 16 | 10 | 20 |
| * This is the diameter across the flats. It is also the size of wrench to use. | ||||
