Titanium Gr 5 Tap End Stud Bolts, Alloy Titanium Stud Stockist, 3.7165 Tie Rods, Titanium Alloy Gr 5 Tie Rods, Titanium Gr 5 Single End Stud Bolt, Ti Gr 5 Full Threaded Stud Bolt, UNS R56400 Half Thread Stud Bolts Supplier in Mumbai, India.
However, if Titanium WNR 3.7165 Stud Bolts are used to collect aluminum, galvanic corrosion might be plenty slower due to the fact the galvanic cutting-edge density at the aluminum floor might be many orders of importance smaller. The relative floor regions of the anode and the cathode are essential in figuring out the price of corrosion. A common mistake is to collect chrome steel plates with carbon metal fasteners; while the use of chrome steel to lock carbon-metal plates is normally acceptable, the opposite is not. Providing electric insulation among the multiple metals, wherein possible, is powerful at stopping this form of corrosion
At multiplied temperatures, all metals react with warm gases. The maximum not unusual place high-temperature gaseous aggregate is air, of which oxygen is the maximum reactive component. To keep away from corrosion in air, carbon metal is restricted to about 480 Degree C (900 Degree F). Oxidation resistance in stainless steels will increase with additions of chromium, silicon, and aluminum. Small additions of cerium growth the adhesion of the oxide layer at the floor. The addition of chromium in Alloy Ti 6Al/4V Stud Bolts stays the maximum not unusual place technique to growth high-temperature corrosion resistance in steels; chromium reacts with oxygen to shape a chromium oxide scale, which reduces oxygen diffusion into the material.
Material Specification Chart of Titanium Gr 5 Stud Bolt
Specification | ASTM F468, B348 / ASME SF468, SB348 |
---|---|
Size | M02 to M33, Custom Sizes |
Length | 3 mm to 200 mm |
Stud Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard | DIN 525, DIN 835, DIN 938, DIN 939, DIN 940, DIN 949-1, DIN 949-2, DIN 975, DIN 976, DIN 2509, BS 2693, BS 3692, BS 4439, IS 1862, IS 13178, ANSI/ASME B18.31.2, ANSI/ASME B16.5 |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Types | Stud Bolts, Fully Threaded Stud Bolts, Tap End Stud Bolts, Double End Stud Bolts, Stud Bolts with Reduced Shank, Reduced Shank, Flange Stud Bolts, Flange Bolting, Weld Studs |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of Stud Bolts | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
Packing of Stud Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating | Ptfe Coated Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Various Types Of Titanium Gr 5 Stud Bolt
- UNS R56400 Double End Studs
- Alloy Titanium Double Ended Stud Bolt
- 3.7165 Double End Stud
- Titanium Gr 5 Double Ended Wheel Stud
- ASME SB348 Ti Gr 5 Dual Threaded Stud
- ASTM B348 Titanium Gr 5 Double Ended Stud Bolt
- Ti Alloy Grade 5 Stud Bolts
- ASME SB348 Titanium Gr 5 Stud Bolts
- 3.7165 Stud Bolt
- Titanium Stud Bolts
- ASTM B348 Titanium Gr 5 Stud Bolts
- UNS R56400 Stud Bolts
- ASTM B348 Titanium Gr 5 Clinch Stud
- 3.7165 Stud
- Grade 5 Titanium Studs
- Titanium Gr 5 Weld Studs
- ASME SB348 Titanium Alloy Gr 5 Stud
- UNS R56400 Dowel Studs
- ASME SB348 Alloy Titanium Self Clinch Flush Head Stud
- Titanium Flush Head Stud
- Titanium Gr 5 Self Clinching Stud
- 3.7165 Flush Head Studs
- ASTM B348 Titanium Gr 5 Flush Head Self Clinching Studs
- UNS R56400 Flush Head Clinch Studs
- ASTM B348 Titanium Gr 5 M5 Threaded Rod
- UNS R56400 Threaded Stud
- 3.7165 Threaded Rods
- ASME SB348 Titanium Gr 5 Threaded Rods
- Grade 5 Titanium Fully Threaded Rod
- Ti Gr 5 Threaded Rods
- ASME SB348 Titanium Gr 5 Single Ended Stud Bolt
- UNS R56400 Single Ended Threaded Stud
- ASTM B348 Titanium Gr 5 Single Ended Stud Bolt
- 3.7165 Single Ended Stud Bolt
- Ti Alloy Grade 5 Single End Studs
- Titanium Alloy Gr 5 M6 Single End Stud
Equivalent Grades of Titanium Gr 5 Stud Bolts
STANDARD | WERKSTOFF NR. | UNS |
Gr 5 | 3.7165 | R56400 |
View Size Table Of Titanium Gr 5 Stud Bolts, We have Global sales network for Ti Gr 5 Stud Bolts, Wide Stockist Of Werkstoff No 3.7165 Tap End Stud Bolts, Double End Stud Bolts In India.
Size Chart of Titanium Gr 5 Stud Bolts
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Check available Sizes of ASME SB348 Titanium Gr 5 Stud Bolt, Ask For Ready Stock of UNS R56400 Stud Bolts in Mumbai, India.
BAGODA
Quick ContactDimensions of Titanium Gr 5 Stud Bolts
Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
---|---|---|---|
M12 | 12 | 0.4724 | 19 |
M10 | 10 | 0.3937 | 17 |
M14 | 14 | 0.5512 | 22 |
M18 | 18 | 0.7087 | 27 |
M16 | 16 | 0.6299 | 24 |
M20 | 20 | 0.7874 | 30 |
M24 | 24 | 0.9449 | 36 |
M22 | 22 | 0.8661 | 32 |
M27 | 27 | 1.063 | 41 |
M33 | 33 | 1.2992 | 50 |
M30 | 30 | 1.1811 | 46 |
M36 | 36 | 1.4173 | 55 |
M42 | 42 | 1.6535 | 65 |
M39 | 39 | 1.5354 | 60 |
M45 | 45 | 1.7717 | 70 |
M52 | 52 | 2.0472 | 80 |
M48 | 48 | 1.8898 | 75 |
M56 | 56 | 2.2047 | 85 |
M64 | 64 | 2.5197 | 95 |
M60 | 60 | 2.3622 | 90 |
M68 | 68 | 2.6772 | 100 |
M76 | 76 | 2.9921 | 110 |
M72 | 72 | 2.8346 | 105 |
M80 | 80 | 3.1496 | 115 |
M90 | 90 | 3.5433 | 130 |
M85 | 85 | 3.3464 | 120 |
M100 | 100 | 3.937 | 145 |
M160 | 160 | 6.2992 | 230 |
M125 | 125 | 4.9212 | 180 |
M110 | 110 | 4.3307 | 155 |
M140 | 140 | 5.5118 | 200 |
Titanium Gr 5 Stud Bolt Torque Chart
Flange Size | B16.5 Class 150 RF/ Ring Gaskets | B16.5 Class 150 FF/ Full Face Gaskets | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | |||||||
1st | 2nd | Final | Dwg/No. | Bolt Size | 1st | 2nd | Final | Dwg*/No. | Bolt Size | |
1/2″ | 10 | 20 | 30 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
3/4″ | 13 | 27 | 40 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
1″ | 15 | 30 | 50 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
1-1/4″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
1-1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
2-1/2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
3″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
3-1/2″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
4″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
5″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
6″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
8″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
10″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
12″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
14″ | 147 | 294 | 490 | 12-bolt | 1″ | 147 | 294 | 490 | 12-bolt | 1″ |
16″ | 147 | 294 | 490 | 16-bolt | 1″ | 147 | 294 | 490 | 16-bolt | 1″ |
18″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ |
20″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ |
24″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ |
Flange Size | B16.5 Class 300 RF/ Ring Gaskets | ||||
---|---|---|---|---|---|
Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence* | ||||
1st | 2nd | Final | Dwg/No. | Stud Bolts Size | |
1/2″ | 10 | 20 | 30 | 4-bolt | 1/2″ |
3/4″ | 15 | 30 | 50 | 4-bolt | 5/8″ |
1″ | 21 | 42 | 70 | 4-bolt | 5/8″ |
1-1/4″ | 30 | 60 | 100 | 4-bolt | 5/8″ |
1-1/2″ | 45 | 90 | 150 | 4-bolt | 3/4″ |
2″ | 33 | 66 | 110 | 8-bolt | 5/8″ |
2-1/2″ | 42 | 84 | 140 | 8-bolt | 3/4″ |
3″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
3-1/2″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
5″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
6″ | 60 | 120 | 200 | 12-bolt | 3/4″ |
8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
10″ | 147 | 294 | 490 | 16-bolt | 1″ |
12″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ |
14″ | 195 | 390 | 650 | 20-bolt | 1-1/8″ |
16″ | 273 | 546 | 910 | 20-bolt | 1-1/4″ |
18″ | 300 | 600 | 1,000 | 24-bolt | 1-1/4″ |
20″ | 300 | 600 | 1,000 | 24-bolt | 1-1/4″ |
24″ | 465 | 930 | 1,550 | 24-bolt | 1-1/2″ |
Weight Chart Of Titanium Gr 5 Stud Bolt
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Ready Stock Titanium Gr 5 Stud Bolts
- 3.7165 Continuous Thread Stud Bolt
- Alloy Titanium M16 Stud Bolt
- Titanium Gr 5 Weld Studs
- Alloy Titanium Threaded Studs
- Ti Gr 5 Wheel Lug Stud Bolt
- Grade 5 Titanium Tap End Stud Bolts
- Titanium Gr 5 Continuous Thread Stud Bolt
- Titanium Alloy Gr 5 High Pressure Stud Bolt
- Titanium Gr 5 Half Thread Stud Bolt
- Alloy Titanium Double Ended Stud Manufacturer
- Titanium Gr 5 Stud Bolt
- Titanium Gr 5 Threaded Rod
- Titanium Gr 5 Threaded Studs
- Titanium Alloy Gr 5 Continuous Thread Stud Bolt
- ASME SB348 Titanium Gr 5 Studs
- Alloy Titanium Tie Rods
- Alloy Titanium Stud Bolts
- Titanium Gr 5 Heavy Stud Bolt
- Titanium Gr 5 Heavy Stud Bolt
- Titanium Threaded Stud Bolt
- Titanium Gr 5 Partial Threaded Stud Bolt Stockholder
- Grade 5 Titanium Stud Bolts With Reduced Shank
- Titanium Gr 5 Flush Head Studs Stockist
- Alloy Titanium Drywall Stud
- Ti Gr 5 Tap End Stud Bolts
- Ti Alloy Grade 5 Industrial Stud Bolts
- Titanium Gr 5 Continuous Thread Stud Bolt
- Alloy Titanium Industrial Stud Bolts Supplier in Mumbai
- Alloy Titanium Flush Head Studs
- ASTM B348 Titanium Gr 5 Double Ended Stud
- Titanium Gr 5 Stud Bolts
- Titanium Gr 5 Tie Bars
- UNS R56400 Stud Bolt
- Titanium Gr 5 Single End Stud Bolt
- Titanium Gr 5 Metric Thread Stud Bolt Manufacturer
- Titanium Gr 5 Studs
- Titanium Gr 5 Double Ended Stud
- Titanium Gr 5 Threaded Studs
- DIN 3.7165 Full Threaded Stud Bolt
- ASTM B348 Titanium Gr 5 Stud Bolts
- ASTM B348 Titanium Gr 5 Double Ended Stud
- Titanium Gr 5 Double End Stud Bolts
- Titanium Alloy Gr 5 Full Threaded Stud Bolt Distributor
- Titanium Gr 5 Tie Rods
- Titanium Gr 5 Threaded Rod Exporter
- ASTM B348 Titanium Gr 5 Double End Stud Bolts
- Titanium Stud Bolt
- Titanium Gr 5 Threaded Stud Bolts