SMO 254 Bolts, UNS S31254 Screws, SMO 254 Stainless Steel Allen Cap Screw, Stainless Steel SMO 254 Fasteners, Alloy 254 Carriage Bolts Stockist, Nitronic 50 Flat Washers, SS SMO 254 Anchor Bolts, 6 Moly Threaded Rod, 1.4547 Nuts Supplier in Mumbai, India.
It has been efficiently followed in chemical methods containing ferric and cupric chloride ions, chlorine, hypochlorite, chlorine dioxide, natural acids, acetic anhydride, seawater, brine and bitter oil and fueloline wellhead fluids.Applications for Stainless Steel UNS S31254 Nuts consist of electricity station flue fueloline desulphurisation additives like ducts and fans, louvers and fueloline valves, dampers, scrubbers, chimney stack linings and containment housings. In chemical, pharmaceutical and meals processing the combination vessels and response chambers collectively with warmness exchangers and switch piping, valves and pumps had been synthetic in these fasteners. It has super resistance to sulphuric acid and hydrochloric acid.At all temperatures under the boiling factor and at concentrations decrease have proven corrosion fees of much less.
Aggressive environments withinthe pulp and paper and waste fluid remedy vegetation will use these fasteners due to the general corrosion resistance supplied through the alloy withinthe maximum competitive sections of the system. Stainless Steel WNR 1.4547 Washers is proof against widespread corrosion, strain corrosion cracking, pitting, and crevice corrosion in an extensive variety of extreme environments. Its resistance to carbide precipitation throughout welding keeps corrosion resistance withinthe warmness-affected zones of welded joints. It resists some of the maximum extreme media encountered in chemical processing, which include decreasing and oxidising acids, fantastically oxidising neutral, and acid chlorides, solvents, formic and acetic acids, acetic anhydride, moist chlorine fueloline, hypochlorites, and chlorine solutions.
Standard Specification For SMO 254 Fasteners
| Specification | ASTM A193, ASME SA193 |
|---|---|
| Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
| Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
| Length | 3 mm to 200 mm |
| Threads | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard | ANSI – American National Standards Institute
|
| In Form of | Hex, Square, Round, Threading as per Gauge Etc. |
| Head drive | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Surface finishing | Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
| Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Surface Coating |
|
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
SMO 254 Equivalent Grade
| STANDARD | UNS | WNR. | AFNOR | SIS | JIS |
| SMO 254 | S31254 | 1.4547 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | 2378 |
Various Types Of SMO 254 Fasteners
SMO 254 Bolts
- SMO 254 Stainless Steel Bolts
- Stainless Steel SMO 254 Bolt
- SMO 254 Heavy Hex Bolts
- SMO 254 Hex Bolts
SMO 254 Screw
- SMO 254 Stainless Steel q Set Screws
- SMO 254 Hex Cap Screws
- SMO 254 Allen Cap Screw
- SMO 254 Screw
- Stainless Steel SMO 254 Screw
SMO 254 Stud Bolts
- Stainless Steel SMO 254 Stud Bolts
- SMO 254 Stud
- SMO 254 Stud Bolts
- SMO 254 Stainless Steel Bolts
View Size Table Of Stainless Steel SMO 254 Fasteners, We have Global sales network for SMO 254 Stainless Steel Stud Bolts, Wide Stockist Of SMO 254 Nuts, Bolts, Washers In India.
Stainless Steel SMO 254 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards SS SMO 254 Fasteners Inch Series
| ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
| ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
| ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
| ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
| ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
| ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
| ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
| ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Dimensions Of Stainless Steel SMO 254 Bolts
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A193 | ACROASTM A193 THE FLATS | ACROASTM A193 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Check available Sizes of Stainless Steel SMO 254 Stud Bolt, Ask For Ready Stock of SMO 254 Fasteners in Mumbai, India.
BAGODA
Quick Contact
SMO 254 Fasteners Torque Chart
| Torque Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
ASTM A453 Gr 660 | ASTM A453 Gr 660 | ||||||
| #2 | 56 | 2.5 | 2.6 | ||||
| 64 | 3.0 | 3.2 | |||||
| #3 | 48 | 3.9 | 4.0 | ||||
| 56 | 4.4 | 4.6 | |||||
| #4 | 40 | 5.2 | 5.5 | ||||
| 48 | 6.6 | 6.9 | |||||
| #5 | 40 | 7.7 | 8.1 | ||||
| 44 | 9.4 | 9.8 | |||||
| #6 | 32 | 9.6 | 10.1 | ||||
| 40 | 12.1 | 12.7 | |||||
| #8 | 32 | 19.8 | 20.7 | ||||
| 36 | 22.0 | 23.0 | |||||
| #10 | 24 | 22.8 | 23.8 | ||||
| 32 | 31.7 | 33.1 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
| ASTM A453 Gr 660 | ASTM A453 Gr 660 | ||||||
| 1/4 | 20 | 75.2 | 78.8 | ||||
| 28 | 94.0 | 99.0 | |||||
| 5/16 | 18 | 132 | 138 | ||||
| 24 | 142 | 147 | |||||
| 3/8 | 16 | 236 | 247 | ||||
| 24 | 259 | 271 | |||||
| 7/16 | 14 | 376 | 393 | ||||
| 20 | 400 | 418 | |||||
| 1/2 | 13 | 517 | 542 | ||||
| 20 | 541 | 565 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
| ASTM A453 Gr 660 | ASTM A453 Gr 660 | ||||||
| 9/16 | 12 | 682 | 713 | ||||
| 18 | 752 | 787 | |||||
| 5/8 | 11 | 1110 | 1160 | ||||
| 18 | 1244 | 1301 | |||||
| 3/4 | 10 | 1530 | 1582 | ||||
| 16 | 1490 | 1558 | |||||
| 7/8 | 9 | 2328 | 2430 | ||||
| 14 | 2318 | 2420 | |||||
| 1 | 8 | 3440 | 3595 | ||||
| 14 | 3110 | 3250 | |||||
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Foot-Pounds | |||||
| ASTM A453 Gr 660 | ASTM A453 Gr 660 | ||||||
| 1 1/8 | 7 | 413 | 432 | ||||
| 12 | 390 | 408 | |||||
| 1 1/4 | 7 | 523 | 546 | ||||
| 12 | 480 | 504 | |||||
| 1 1/2 | 6 | 888 | 930 | ||||
| 12 | 703 | 732 | |||||
Stainless Steel SMO 254 Nut Weight Chart
| AS PER IS 1363/67 MM THREADS | ||||||||||
| FOR 100 NOS APPROXIMATE WEIGHT IN KGS | ||||||||||
| LENGTH | Stainless Steel Fasteners DIAMETER | |||||||||
| M 6 | M 5 | M 8 | M 12 | M 10 | M 14 | M 18 | M 22 | M 16 | M 20 | |
| 16 mm | 0.743 | 0.448 | 1.590 | 3.211 | ||||||
| 20 mm | 0.812 | 0.598 | 1.711 | 4.892 | 3.411 | |||||
| 25 mm | 0.897 | 0.660 | 1.871 | 5.252 | 3.660 | 8.170 | ||||
| 30 mm | 1.010 | 0.737 | 2.070 | 5.574 | 3.912 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 1.120 | 0.804 | 2.271 | 5.974 | 4.223 | 10.000 | 16.026 | 11.416 | 19.608 | |
| 40 mm | 1.230 | 0.881 | 2.470 | 6.410 | 4.533 | 10.288 | 16.667 | 12.107 | 20.747 | |
| 45 mm | 1.340 | 0.958 | 2.671 | 6.859 | 4.840 | 10.504 | 17.241 | 12.821 | 21.739 | |
| 50 mm | 1.450 | 1.030 | 2.870 | 7.299 | 5.155 | 11.261 | 17.857 | 28.409 | 13.624 | 22.727 |
| 55 mm | 1.560 | 3.071 | 7.740 | 5.464 | 11.628 | 18.868 | 30.120 | 14.409 | 23.810 | |
| 60 mm | 1.670 | 3.270 | 8.183 | 5.774 | 12.255 | 20.000 | 32.051 | 15.244 | 25.126 | |
| 65 mm | 1.781 | 3.472 | 8.621 | 6.083 | 12.626 | 21.008 | 34.014 | 16.026 | 26.455 | |
| 70 mm | 1.890 | 3.671 | 9.058 | 6.394 | 12.987 | 22.124 | 35.461 | 16.835 | 27.778 | |
| 75 mm | 2.000 | 3.873 | 9.506 | 6.702 | 13.228 | 23.256 | 39.063 | 17.606 | 29.070 | |
| 80 mm | 2.111 | 4.072 | 10.000 | 7.013 | 13.889 | 24.510 | 40.000 | 18.248 | 30.303 | |
| 90 mm | 4.472 | 10.917 | 7.634 | 14.925 | 26.042 | 41.667 | 19.841 | 33.113 | ||
| 100 mm | 4.873 | 11.820 | 8.251 | 16.340 | 27.778 | 46.296 | 21.459 | 35.714 | ||
| 110 mm | 12.723 | 8.881 | 17.730 | 31.250 | 47.170 | 23.041 | 38.168 | |||
| 120 mm | 13.624 | 9.506 | 18.797 | 32.895 | 50.000 | 24.631 | 40.984 | |||
| 130 mm | 14.535 | 10.101 | 20.000 | 34.722 | 52.632 | 26.316 | 43.478 | |||
| 140 mm | 15.432 | 10.707 | 20.833 | 35.461 | 55.556 | 27.933 | 46.296 | |||
| 150 mm | 16.340 | 11.312 | 22.222 | 37.594 | 58.824 | 29.412 | 48.544 | |||
| 160 mm | 17.241 | 11.905 | 24.272 | 40.984 | 61.728 | 31.056 | 50.505 | |||
| 170 mm | 18.116 | 12.500 | 64.935 | 32.680 | 53.191 | |||||
| 180 mm | 19.011 | 13.123 | 26.882 | 67.568 | 34.247 | 55.556 | ||||
| 190 mm | 19.920 | 13.736 | 70.423 | 35.971 | 58.140 | |||||
| 200 mm | 20.833 | 14.327 | 29.586 | 49.020 | 73.529 | 37.594 | 60.976 | |||
| 220 mm | 22.624 | 15.528 | 79.365 | 40.650 | 65.789 | |||||
| 240 mm | 24.510 | 16.722 | 84.746 | 43.860 | 71.429 | |||||
| 250 mm | 25.381 | 17.301 | 87.719 | 45.455 | 74.627 | |||||
| 260 mm | 26.316 | 17.921 | 90.909 | 47.170 | 76.923 | |||||
| 280 mm | 28.090 | 19.157 | 98.039 | 50.505 | 81.967 | |||||
| 300 mm | 29.940 | 20.325 | 104.167 | 53.763 | 87.719 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Ready Stock SMO 254 Fasteners
- SMO 254 Acorn Nuts
- 1.4547 Washers
- Alloy 254 Nyloc Nuts
- SMO 254 Stainless Steel Structural Bolts
- UNS S31254 Lock Nut
- Stainless Steel SMO 254 Wing Nuts
- Alloy 254 Machine Fasteners Exporter
- SMO 254 Tie Rods
- SS SMO 254 Hex Coupling Nut
- SMO 254 T-Head Bolts
- SMO 254 Stainless Steel Tooth Lock Washer
- Alloy 254 Countersunk Washer
- UNS S31254 Flat Washers
- UNS S31254 Split / Lock Washer
- SMO 254 Self Locking Nuts
- 254 SMO Dock Washer Stockholder
- 1.4547 Heavy Hex Nuts
- 254 SMO Double Ended Stud
- SMO 254 Anchor Bolts
- 254 SMO Plain Washer Supplier in Mumbai
- SMO 254 Stainless Steel Elevator Bolt
- SMO 254 Stainless Steel Foundation Bolts Manufacturer
- SMO 254 Steel Bolts
- SMO 254 Eye Bolts
- SMO 254 Heavy Hex Bolts
- SMO 254 Hex Washers
- SMO 254 Square Nuts
- Stainless Steel SMO 254 Fasteners
- SMO 254 Threaded Rod
- Alloy 254 Hex Set Screw Manufacturer
- Alloy 254 Allen Cap Screw
- SS SMO 254 Hex Head Bolt
- UNS S31254 Fasteners
- Stainless Steel SMO 254 Fender Washer
- SMO 254 Fasteners
- UNS S31254 D Ogee Washer
- Alloy 254 Stud Bolts
- UNS S31254 Machine Bolt
- SMO 254 Hexagonal Washer
- SMO 254 Stainless Steel Hex Domed Cap Nuts
- Stainless Steel SMO 254 Flange Bolt
- 1.4547 Carriage Bolt Stockist
- SMO 254 Customized Washer
- 254 SMO Wing Nuts
- SMO 254 Concrete Screw
- 254 SMO Stud Bolts
- UNS S31254 Screws Distributor
- Alloy 254 Hex Head Bolts
- SMO 254 Stainless Steel Class C Bolts
SMO 254 Fasteners Chemical Composition
| Grade | Ni | C | Mo | Mn | Si | F | Cu | S | P | Cr |
| SMO 254 | 17.5 – 18.5 | 0.02 max | 6 – 6.5 | 1 max | 0.8 max | – | 0.5 – 1 | 0.01 max | 0.03 max | 19.5 – 20.5 |
SMO 254 Fasteners Mechanical Properties
| Element | Density | Melting Point | Yield Strength (0.2%Offset | Tensile Strength | Elongation |
| SMO 254 | 8.0 g/cm3 | 1320-1390 ℃ | 300 | 650 | 35 % |
